Automatic cleaning with the FAST CLEAN GB function
With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated and burns away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven due to the spontaneous combustion process. There is no cause for concern: this process is both normal and
Before initiating the FAST CLEAN mode:
•Remove large or coarse food residues from inside of the oven using a damp sponge. Do not use detergents.
•Remove all accessories.
•Do not place tea towels or pot holders over the oven handle.
If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.
The programme may only be started once the oven door has been closed.
To activate the FAST CLEAN mode, press the 
button and select the desired power level (the mode has three power levels which cannot be modified):
1.Economy (ECO): 1 hour
2.Normal (NOR): 1 hour and 30 minutes
3.Intensive (INT): 2 hours.
Safety devices
•The door is locked automatically as soon as the temperature exceeds a certain value.
•Should a malfunction occur, the heating elements will switch off.
•Once the oven door has been locked, you cannot change the duration and end time settings.
Programming is possible only after selecting the FAST CLEAN mode.
Programming delayed automatic cleaning
Press the 
button, then:
1.Adjust the time using the “+” and
2.Press the 
button to memorise the setting.
3.Press the “START” button to confirm the programming process.
4.When the selected time has elapsed, END appears on the TEMPERATURE display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN mode level has been selected: default set time 1 hour. 12:30 is selected as the end time.
The programme will start automatically at 11:30 a.m.
Programming has been set when the 
and 
buttons flash. The TIME and DURATION displays show the FAST CLEAN end time and its duration alternately.
To cancel a programming procedure press the “STOP” button.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven has cooled down sufficiently before you can open the oven door. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.
12