Analogue programmer
GB
12
9 | 3 |
6
Setting the time
Press the PROGRAMMER knob and turn it anticlockwise to set the correct time.
!The clock can only be set if the oven is connected to the mains. In case of a power failure, the PROGRAMMER will stop: the correct time will have to be reset.
Starting the oven
1.Turn the PROGRAMMER knob anticlockwise until the “9” symbol is displayed.
2.Pull the PROGRAMMER knob and turn it anticlockwise until the knob marker lines up with the current time. A click will indicate the end of the programming phase.
3.Select the desired cooking mode using the SELECTOR knob.
4.To turn the oven off, set the SELECTOR knob back
to the “0” position.
Programming your cooking
Programming instant cooking time
1.Turn the PROGRAMMER knob anticlockwise until the desired cooking time is displayed.
2.Pull the PROGRAMMER knob and turn it anticlockwise until the knob marker lines up with the current time. A click will indicate the end of the programming phase.
3.Select the desired cooking mode using the SELECTOR knob. The oven comes on immediately and stays on for the entire duration of the set cooking time.
4.When the selected time has elapsed, a buzzer will sound and the oven will turn off.
5.Turn the PROGRAMMER knob anticlockwise until the “9” symbol is displayed.
6.To turn the oven off, set the SELECTOR knob back to the “0” position.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme stops automatically at 10:15 a.m.
Programming a delayed cooking time
1.Turn the PROGRAMMER knob anticlockwise until the desired cooking time is displayed.
2.Pull the PROGRAMMER knob and turn it anticlockwise until the knob marker lines up with the desired cooking start time.
3.Select the desired cooking mode using the SELECTOR knob. The oven will come on at the set cooking start time and will stay on for the entire duration of the set cooking time.
4.When the selected time has elapsed, a buzzer will sound and the oven will turn off.
5.Turn the PROGRAMMER knob anticlockwise until the “9” symbol is displayed.
6.To turn the oven off, set the SELECTOR knob back to the “0” position.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed and the start time is set to 11:00. The programme starts automatically at 11:00 and ends at 12:15.
!To cancel programming, turn the PROGRAMMER knob anticlockwise until the symbol “9” is displayed.
6