Hotpoint GE641TX Maintenance and care, Switching the appliance off, Cleaning the appliance

Page 10

Maintenance and care

GB

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

!Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair.

!Never use steam cleaners or pressure cleaners on the appliance.

It is usually enough to wash the hob with a damp sponge and dry it with absorbent kitchen roll.

The removable parts of the burners should be washed frequently with warm water and soap and any burnt-on substances removed.

For hobs which ligth automatically, the terminal part of the electronic instant lighting devices should be cleaned frequently and the gas outlet holes should be checked for blockages.

Stainless steel can be marked by hard water that has been left on the surface for a long time, or by aggressive detergents containing phosphorus.

After cleaning, rinse and dry any remaining drops of water.

Gas tap maintenance

Over time, the taps may become jammed or difficult to turn. If this happens, the tap must be replaced.

!This procedure must be performed by a qualified technician authorised by the manufacturer.

10

Image 10
Contents Operating Instructions HOBInstallation PositioningGas connection Positioned in or next to the tap pin Burner and nozzle specifications Liquid Gas Natural GasElectrical Connection Carried OUT by a Qualified ElectricianDescription of the appliance Overall viewPractical advice on using the burners Start-up and useDisposal Precautions and tipsGeneral safety Recycling & Disposal InformationCleaning the appliance Maintenance and careSwitching the appliance off Gas tap maintenanceTroubleshooting Problem Possible causes/SolutionAfter Sales Service GuaranteeGB Page Page Xerox Business Services