Hotpoint HL500E manual Fig. a

Page 5

Installation

The height of the cooker can be adjusted by means of adjustable feet in the plinth (900mm - 915mm). Adjust the feet by tilting the cooker from the side. Then install the product into position.

NOTE: This appliance must not be fitted on a platform.

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing.

Adjacent side walls which project above hob level, must not be nearer to the cooker than 125mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 400mm. (Fig.A)

Before moving your cooker check that it is cool, and switch off at the cooker control unit.

Splashplate optional, apply to Parts Department (see Back Cover for contact number.)

125mm

Min

1450mm

Fig. A

400mm Min

503mm

Min

125mm

Min

1850mm

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Kitchen think Contents Introduction Electrical connection InstallationFig. a Always Safety InformationDo not Leave Unattended While Cooking Safety Information NeverRemove the product packaging Installing the Eye-Level GrillPage Features Oven Grill Control PanelHotplates General Information Notes Use of HotplatesPans should Hotplates General Information Notes Do Not Choosing Your Utensils Is Used Children should be Kept Away GrillingFood Grill Setting Approximate Cooking time Grill ChartConventional Oven Conventional Oven Conventional Oven Cooking Chart MeatConventional Oven Cooking Conventional Oven Cooking Chart BakingCare and Cleaning Cooking Results Not Satisfactory? Problem Check GrillingSomething Wrong with your Cooker? Technical CharacteristicsPage Page After Sales Service Guarantee Key Contacts
Top Page Image Contents