Hotpoint HL500E manual

Page 9

5 . Fix the Grill assembly to the cooker using three screws on the right-hand side and three screws on the left- hand side as shown in the photograph, using the screws supplied.

6.Connect the 3 electric Grill wires.

7.Ensure that the wires are positioned as in figure and that the sleeving is over the bar.

8.Replace the rear cover and fix it in place using the same screws (6) as removed previously in step 3 of this procedure.

9.Connect the cooker to the ELECTRICITY network.

Image 9

Contents Kitchen think Contents Introduction Electrical connection InstallationFig. a Always Safety InformationDo not Leave Unattended While Cooking Safety Information NeverRemove the product packaging Installing the Eye-Level GrillPage Features Oven Grill Control PanelHotplates General Information Notes Use of HotplatesPans should Hotplates General Information Notes Do Not Choosing Your Utensils Is Used Children should be Kept Away GrillingFood Grill Setting Approximate Cooking time Grill ChartConventional Oven Conventional Oven Conventional Oven Cooking Chart MeatConventional Oven Cooking Conventional Oven Cooking Chart BakingCare and Cleaning Cooking Results Not Satisfactory? Problem Check GrillingSomething Wrong with your Cooker? Technical CharacteristicsPage Page After Sales Service Guarantee Key Contacts