www.GEAppliances.com
Stainless Steel Surfaces (on some models)
Safety
Do not use a
To clean the
If food soil remains, try a general kitchen cleaner, such as Fantastik®, Simple Green®, or Formula 409®.
For
Apply cleaner with a damp sponge. Use a clean, hot, damp cloth to remove cleaner. Dry with a dry, clean cloth. Always scrub lightly in the direction of the grain.
After cleaning, use a
Instructions Operating Instructions
Socket
31⁄2”Maximum length
Bulb
Tab
Glass cover
Oven Light Bulb (on some models)
NOTE: The glass cover (on some models) should be removed only when cold. Wearing latex gloves may offer a better grip.
Before replacing the bulb, disconnect electrical power to the oven at the main fuse or circuit breaker panel. Let the bulb cool completely before removing it. For your safety, do not touch a hot bulb with a damp cloth. If you do, the bulb will break.
To remove:
Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket. Remove the bulb.
To replace:
Put in a new
NOTE:
■A
■For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.
Care and Cleaning
| Oven Light Bulb (on some models) |
| CAUTION: Before replacing your oven light bulb, |
| disconnect the electrical power to the oven at the |
| main fuse or circuit breaker panel. |
| Be sure to let the light cover and bulb |
| cool completely. |
| To remove the cover: |
Wire cover holder | Hold a hand under the cover so it |
| doesn’t fall when released. With |
| fingers of the same hand, firmly |
| push back the wire cover holder. |
| Lift off the cover. |
| Do not remove any screws to remove the cover. |
| Replace bulb with a |
| appliance bulb. |
To replace the cover:
Place it into grooves of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.
Connect electrical power to the oven.
21