Care and cleaning of the oven.

www.GEAppliances.com

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

Safety

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape must be removed from all chrome trim. It cannot be removed if it is baked on.

Instructions Operating

Lift the door straight up and off the hinges.

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket—it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Lift-Off Oven Door

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door, open it to the broil stop position. Grasp firmly on each side and lift the door straight up and off the hinges.

Do not place hands between the hinge and the oven door frame.

To replace the door, make sure the hinges are in the broil stop position. Position the slots in the bottom of the door squarely over the hinges and slowly lower it over both hinges.

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

■The area outside the gasket and the front frame can be cleaned with a soap-filled plastic scrubbing pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Instructions Care and Cleaning Troubleshooting Tips

Oven Heating Elements

Do not clean the bake element or the broil

To clean the oven floor, gently lift

element. Any soil will burn off when the elements

the bake element. Clean with warm

are heated.

soapy water.

19

Consumer Support

Page 18 Page 20
Page 19
Image 19
GE JRP20 Care and cleaning of the oven, Instructions Care and Cleaning Troubleshooting Tips, How to Remove Packaging Tape
Page 18 Page 20

JRP20 specifications

The GE JRP20 is an advanced jet engine designed by General Electric, specifically engineered to meet the demands of modern aviation with unmatched performance, efficiency, and reliability. This innovative engine boasts a variety of features and technologies that position it as a leader in the aerospace industry.

One of the standout features of the GE JRP20 is its advanced aerodynamic design. The engine employs state-of-the-art computer simulations to optimize airflow, significantly enhancing its performance and fuel efficiency. Its high bypass ratio allows for quieter operation while delivering powerful thrust necessary for a wide range of aircraft, including regional jets and narrow-body airliners.

A key characteristic of the GE JRP20 is its modular design. This design philosophy not only simplifies maintenance but also allows for quick and efficient repairs and part replacements. By employing modular components, airlines can minimize downtime and reduce operational costs, ultimately translating to increased profitability over the engine's lifecycle.

Incorporating cutting-edge materials is another hallmark of the JRP20. The engine utilizes advanced composite materials and super alloys that enhance durability and reduce weight. These materials contribute to improved fuel efficiency and performance while simultaneously extending the engine's lifespan. The reduction in weight helps optimize the aircraft's overall efficiency, allowing it to carry larger payloads without compromising performance.

Additionally, the GE JRP20 is equipped with advanced digital technologies that provide real-time data monitoring and analytics. These technologies enable predictive maintenance, helping operators to anticipate issues before they arise. By analyzing data from various engine components, airlines can make informed decisions about maintenance schedules and operational practices, enhancing overall safety and reliability.

One of the most impressive aspects of the JRP20 is its commitment to sustainability. The engine is designed to produce lower emissions compared to its predecessors, aligning with the aviation industry's shift toward greener technologies. Enhanced fuel efficiency not only reduces environmental impact but also helps airlines lower operational costs, making the JRP20 a smart choice for environmentally conscious carriers.

In summary, the GE JRP20 stands out as a pioneering jet engine that combines advanced aerodynamics, modular design, high-performance materials, and innovative digital capabilities. Its focus on efficiency, reliability, and sustainability positions it as a formidable choice for airlines looking to enhance performance while reducing their carbon footprint. The JRP20 is a significant step forward in the evolution of jet propulsion technology, setting new standards for the future of aviation.
Top Page Image Contents