Using the oven controls, Care and Cleaning

Operating Instructions Safety Instructions

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.

Oven Control, Clock and Timer Features and Settings

Care and Cleaning

BAKE Pad

Touch this pad to select the bake function.

BAKE Light

Flashes while in edit mode—you can change the oven temperature at this point. Glows when the oven is in bake mode.

BROIL HI/LO Pad

Touch this pad to select the broil function.

time of day will flash in the display when the oven is first turned on.

START Pad

Must be touched to start any cooking function.

– Pad

Short taps to this pad will decrease the time or temperature by small amounts. Touch and hold the pad to decrease the time or temperature by larger amounts.

Troubleshooting Tips

BROIL Light

Flashes while in edit mode—you can switch from HI to LO BROIL at this point. Glows when the oven is in broil mode.

Display

Shows the operations you have selected, the time of day and the cooking status.

COOKING TIME Pad

Touch this pad and then touch the + or – pad to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

+ Pad

Short taps to this pad will increase the time or temperature by small amounts. Touch and hold the pad to increase the time or temperature by larger amounts.

CLEAR/OFF Pad

Touch this pad to cancel ALL oven operations except the clock and timer.

SELF CLEAN Pad

Touch this pad to select the self-cleaning function. See the Using the self-cleaning oven section.

Consumer Support

DELAY START Pad

Use along with the COOKING TIME or

SELF CLEAN pad to set the oven to start and stop automatically at a time you set.

	OVEN LIGHT ON/OFF Pad
	Touch this pad to turn the oven light on
	or off.
	TIMER/CLOCK Pad
	Touch this pad to select the timer feature. Then
	press + and – pads to adjust time.
6	To set the clock, touch this pad twice and hold 3
	seconds and then touch the + and – pads. The

CLEAN Light

Flashes while in edit mode—you can change the length of time for the self-clean cycle at this point. Glows when the oven is in the self-clean cycle. After the self-clean cycle, the light will turn off. Unlatch the door.

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code.

Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation.

If function error code repeats, disconnect power to the oven and call for service.

JRP20 specifications

The GE JRP20 is an advanced jet engine designed by General Electric, specifically engineered to meet the demands of modern aviation with unmatched performance, efficiency, and reliability. This innovative engine boasts a variety of features and technologies that position it as a leader in the aerospace industry.

One of the standout features of the GE JRP20 is its advanced aerodynamic design. The engine employs state-of-the-art computer simulations to optimize airflow, significantly enhancing its performance and fuel efficiency. Its high bypass ratio allows for quieter operation while delivering powerful thrust necessary for a wide range of aircraft, including regional jets and narrow-body airliners.

A key characteristic of the GE JRP20 is its modular design. This design philosophy not only simplifies maintenance but also allows for quick and efficient repairs and part replacements. By employing modular components, airlines can minimize downtime and reduce operational costs, ultimately translating to increased profitability over the engine's lifecycle.

Incorporating cutting-edge materials is another hallmark of the JRP20. The engine utilizes advanced composite materials and super alloys that enhance durability and reduce weight. These materials contribute to improved fuel efficiency and performance while simultaneously extending the engine's lifespan. The reduction in weight helps optimize the aircraft's overall efficiency, allowing it to carry larger payloads without compromising performance.

Additionally, the GE JRP20 is equipped with advanced digital technologies that provide real-time data monitoring and analytics. These technologies enable predictive maintenance, helping operators to anticipate issues before they arise. By analyzing data from various engine components, airlines can make informed decisions about maintenance schedules and operational practices, enhancing overall safety and reliability.

One of the most impressive aspects of the JRP20 is its commitment to sustainability. The engine is designed to produce lower emissions compared to its predecessors, aligning with the aviation industry's shift toward greener technologies. Enhanced fuel efficiency not only reduces environmental impact but also helps airlines lower operational costs, making the JRP20 a smart choice for environmentally conscious carriers.

In summary, the GE JRP20 stands out as a pioneering jet engine that combines advanced aerodynamics, modular design, high-performance materials, and innovative digital capabilities. Its focus on efficiency, reliability, and sustainability positions it as a formidable choice for airlines looking to enhance performance while reducing their carbon footprint. The JRP20 is a significant step forward in the evolution of jet propulsion technology, setting new standards for the future of aviation.

GE JRP20 Using the oven controls, Operating Instructions Safety Instructions, Care and Cleaning

Models: JRP20