Panasonic KX-TG5202, KX-FPG391 H

CAUTION:

To reduce the risk of fire or injury to persons, read and follow

these instructions.

1. Use only the battery(ies) specified.

2. Do not dispose of the battery(ies) in a fire. They may explode.

Check with local waste management codes for special disposal

instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is

corrosive and may cause burns or injury to the eyes or skin.

The electrolyte may be toxic if swallowed.

When you hold the phone to your ear, noise might be heard in

your Hearing Aid. Some Hearing Aids are not adequately

shielded from external RF (radio frequency) energy. If noise

occurs, use an optional headset accessory or the speakerphone

option (if applicable) when using this phone. Consult with your

audiologist or Hearing Aid manufacturer about the availability of

Hearing Aids which provide adequate shielding to RF energy

commonly emitted by digital devices.

Things You Should Know Things You Should Know

5-B Troubleshooting(for Charger Unit)

For assistance, please call: 1-800-211-PANA(7262)

5-A Optional Headset

Connecting an optional headset to the handset allows hands-free

phone conversation. Please use only a Panasonic KX-TCA60,

KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92 or

KX-TCA98 headset. To order, call the accessories telephone number

in section 1-A.

To connect a headset

Open the headset jack cover, and insert the headset plug into the

headset jack as shown.

•To switch to the speakerphone while using the headset:

Press []. To return to the headset, press [].

Headset sold separately. Model shown here is KX-TCA88.

Headset Jack

Problem

“ ” is flashing on the

display.

There is excessive noise

from the radio.

No sound from the radio.

“ ” is displayed below the

time.

While programming, the

display will return to the

current time and you

cannot program any

function.

All preset FM stations have

been erased and the radio

alarm does not sound at

the set time.

he radio/buzzer alarm

does not sound at the set

time.

If you cannot solve your

problem

Cause & Remedy

•The clock needs to be set (1-H).

•Move the charger away from other

electrical appliances.

•Make sure the AC adaptor is

connected and the antenna is

standing (1-C).

•

A power failure may have occurred

or the AC adaptor may be

disconnected. Reconnect power. If

the unit loses power for about 10

minutes, clock memory will be lost

(1-H). Radio and buzzer alarm

settings (4-A, 4-B), and radio station

presets (2-B) will also be lost.

•Do not pause for over 60 seconds

while programming.

•If you have changed the FM tuning

sensitivity (2-E), all preset FM

stations and the radio alarm setting

will be erased. The buzzer alarm

will sound at the set time instead of

the radio.

•A power failure may have occurred

and the alarm time may be erased.

Set the time (1-H, 4-A, 4-B).

•For handset troubleshooting,

please see the base unit Operating

Instructions.

•Visit our website:

http://www.panasonic.com/support

•

http://www.panasonic.com/contactinfo

•Call our customer call center at:

1-800-211-PANA(7262)

5-C FCC and Other Information

WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR)

MAKING TEST CALLS TO EMERGENCY NUMBERS:

1)Remain on the line and briefly explain to the dispatcher the

reason for the call.

2)Perform such activities in the off-peak hours, such as early

morning or late evenings.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Privacy of communications may not be ensured when using this

phone.

CAUTION:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate this device.

Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for

help.

Operating near 5.8GHz electrical appliances may cause

interference. Move away from the electrical appliances.

FCC RF Exposure Warning:

To comply with FCC RF exposure requirements, the handset unit

may be carried and operated with only the specific provided

belt-clip. Other non-tested belt-clips or similar body-worn

accessories may not comply and must be avoided.

This equipment is hearing aid compatible as defined by the FCC

in 47 CFR Section 68.316.