1Press[RADIO, ALARM SET].
•If you do not proceed to the next step
within 5 seconds, the display will return
to the current time.
2Adjust the alarm time by pressing
[+, TUNE/CLOCK]or [–, TUNE/CLOCK].
•Pressing and holding [+]or [–] changes
the time faster.
3Press[RADIO, ALARM SET].
•The radio will automatically turn on.
4Press[FM/AM, RADIO] to switch between FM and AM.
5Press the desired memory button ([M1]to
[M5]).
OR
Tune in to the desired station by pressing
[+, TUNE/CLOCK]or [–, TUNE/CLOCK].
6Adjust the volume by using the VOLUME
control.
7Press[RADIO, ALARM SET] to save the radio alarm time and the
station.
•The selected station stops flashing and disappears.
•The selected alarm time returns to the current time.
•“ ” is displayed while the radio alarm is turned on.
•The radio will turn off.
•The radio will automatically turn on at the set time and will turn off
after 1 hour.
•You can exit alarm setting mode any time by pressing [OFF].
•To change only the radio alarm time, repeat steps 1 to 3, then
press[RADIO, ALARM SET].
•If a power failure occurs, the radio alarm time and station preset will
be retained for about 10 minutes.

To confirm the radio alarm time and station

Press[RADIO, ALARM SET].
•The alarm time and the station will be displayed for about 5 seconds.
4
Using the Alarms Section 4
The charger unit features an alarm clock. You can set the alarm to
play the radio or to sound a buzzer at a set time.
The radio alarm and the buzzer alarm can be set separately.
For assistance, please call: 1-800-211-PANA(7262)
VOLUME Control
[OFF]
[+,
-
, TUNE/CLOCK]
[FM/AM, RADIO]
Memory Buttons
([M1],[M2],[M3],[M4] and [M5])
[SNOOZE/MUTE]
[RADIO, ALARM SET]
[BUZZER, ALARM SET]
[ALARM ON/OFF]
[OFF]
[SNOOZE/MUTE]

4-C Stopping the Alarm

When the alarm sounds at the set time, “ ” is displayed and
“ ” and/or “ ” flashes.

4-A Setting the Radio Alarm

4-D Turning the Alarm on/off

Once alarm times have been set for the radio alarm and buzzer
alarm, the two alarms can be turned off and on independently and
together. If an alarm is turned on, it will sound at the set time
everyday. If an alarm is turned off, it will not sound.

To stop the alarm temporarily (SNOOZE)

Press[SNOOZE/MUTE].
•The alarm will then start again in 6 minutes. You can press
[SNOOZE/MUTE]again to stop the alarm.

To stop the alarm for the day

Press[OFF].
•
The setting is retained and the alarm will sound daily until you turn the
alarm off (4-D). “ ” and/or “ ” will remain on the display.
Press[ALARM ON/OFF] repeatedly to select the desired alarm
mode. 4 modes are available.
— Radio alarm on (“ ” is displayed.)
— Buzzer alarm on (“ ” is displayed.)
— Both alarms on (“ ” and “ ” are displayed.)
— Both alarms off (“ ” and “ ” disappear.)
•
When an alarm mode is selected, the alarm time is displayed briefly.
If the alarm time is not set, “ ” is displayed briefly.
[ALARM ON/OFF]

4-B Setting the Buzzer Alarm

1Press[BUZZER, ALARM SET].
•If you do not proceed to the next step
within 5 seconds, the display will return
to the current time.
2Adjust the alarm time by pressing
[+, TUNE/CLOCK]or [–, TUNE/CLOCK].
•Pressing and holding [+]or [–] changes the time faster.
3Press[BUZZER, ALARM SET] to save the buzzer alarm time.
•The time stops flashing and returns to the current time.
•“ ” is displayed while the buzzer alarm is turned on.
•The buzzer will start at the set time and will automatically stop
after 10 minutes.
•You can exit alarm setting mode any time by pressing [OFF].
•If a power failure occurs, the buzzer alarm time will be retained for
about 10 minutes.

To confirm the buzzer alarm time

Press[BUZZER, ALARM SET].
•The alarm time will be displayed for about 5 seconds.
Ex. Memory Number 1 is
set to AM 520 kHz.