Hotpoint SX 1049Q CX, SX 1049L CX manual N L

Page 3

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

•Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

•Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

•Unscrew the cable clamp screw and the contact screws L-N-6.

•Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green 6

•Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

APPLIANCE SPECIFICATIONS

Dimensions

width 43.5 cm

height 32 cm

 

depth 41.5 cm

 

 

Volume

58 l

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A Supply cable: 3x1.5mm2

Electrical

voltage: 230 - 240 V~ 50/60 Hz

(see data plate)

connections

maximum power absorbed

 

2800-3000 W

 

 

 

 

Directive 2002/40/EC on the label

 

of electric ovens. Standard EN 50304

ENERGY

Declared energy consumption

LABEL*

for Forced convection Class –

 

heating mode:

 

ECO.

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

* Without removable guide rails

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operating Instructions Positioning InstallationN L Overall view Display in programming modeDisplay in cooking mode Description of the applianceStart-up and use Switching the oven on for the first timeSetings menu commands Setting the clockStarting the oven Setting the minute minderDemo mode Restoring the factory settingsStandby Manual cooking modes ModesAutomatic cooking modes ECO modePage Page Programming cooking Practical cooking adviceMultilevel Cooking advice tableModes Foods Weight Rack position Preheating Standard Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCare and maintenance Holes for the right Problem Possible cause Solution TroubleshootingHotpoint Service Parts and AccessoriesAppliance Registration Free Helpdesk Service Months Parts and Labour GuaranteeYear Parts Guarantee Extended Guarantees

SX 1049Q CX, SX 1049L CX specifications

The Hotpoint SX 1049L CX and SX 1049Q CX are contemporary kitchen appliances designed to elevate the cooking experience with innovative features and cutting-edge technology. Both models cater to the growing demand for multifunctional cooking solutions that fit seamlessly into modern homes.

Starting with the design, both models sport a sleek and modern aesthetic, ensuring they complement various kitchen decors. Their spacious interiors are equipped to handle large meals, making them ideal for families or anyone who enjoys entertaining guests. The user-friendly interfaces provide intuitive navigation, allowing for easy selection of cooking modes and settings.

One of the standout features of the Hotpoint SX 1049L CX is its advanced cooking technology, which includes a multi-cooking setting. This feature combines several cooking methods, such as baking, broiling, and grilling, enabling users to achieve professional-quality results at home. The SX 1049Q CX also offers similar capabilities, enhancing its versatility for any culinary adventure.

Both models incorporate energy-efficient technologies that not only help reduce electricity consumption but also ensure optimal cooking performance. The eco-friendly design is complemented by various safety features, including automatic shut-off functions and child locks, providing peace of mind for families.

The SX 1049L CX offers a unique steam cooking option, promoting healthier meal preparation while retaining essential nutrients and flavors. This feature is especially appealing for health-conscious consumers. On the other hand, the SX 1049Q CX includes a powerful convection fan that circulates hot air evenly, allowing for consistent cooking results and reducing overall cooking times.

Furthermore, both models come equipped with customizable cooking programs, allowing users to save their favorite settings for quick access. The digital displays are easy to read, providing clear feedback on cooking progress and remaining time, enhancing the overall cooking experience.

In summary, the Hotpoint SX 1049L CX and SX 1049Q CX combine practical design with innovative technology to provide versatile cooking solutions. Their main features, such as multi-cooking settings, energy efficiency, and advanced safety functions, make them excellent choices for any home chef looking to simplify meal preparation while ensuring exceptional cooking outcomes. Whether used for everyday meals or special occasions, these appliances are equipped to handle a wide range of culinary tasks with ease.
Top Page Image Contents