Hotpoint fdeb 31010 manual Troubleshooting, Problem Possible causes / Solutions

Page 15

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

 

 

 

cannot be controlled

approximately one minute and reset the program.

 

 

 

 

• The appliance has not been plugged in properly.

 

 

 

 

• The dishwasher door has not been shut properly.

 

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

 

 

 

dishwasher.

• The water inlet hose is bent (see Installation).

 

 

 

 

• The drain duct is blocked.

 

 

 

 

• The filter is clogged up with food residues.

 

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

 

 

 

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

 

and use).

 

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

 

 

 

covered in a white film or

hardness of the water (see Rinse aid and salt).

 

 

 

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

 

 

 

streaked or have a bluish tinge.

 

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

 

 

 

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

 

 

 

salt).

 

 

 

 

• The rinse aid dispenser setting is not suitable.

 

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

 

 

 

• The crockery has not been arranged well.

 

 

 

 

• The sprayer arms cannot move freely.

 

 

 

 

• The wash cycle is too gentle (see Wash cycles).

 

 

 

 

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

 

and use).

 

 

 

 

• The lid on the rinse aid compartment has not been shut correctly.

 

 

 

 

• The filter is dirty or blocked (see Care and maintenance).

 

 

 

 

• The refined salt level is low (see Rinse aid and salt).

 

 

 

The dishwasher does not take any

• There is no water in the mains supply.

 

 

 

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

 

 

 

(several short beeps are emitted*)

• Turn on the tap and the appliance will start after a few minutes.

 

 

 

(the Drying and End indicator lights

• The appliance lock has been activated because no action was taken when the

 

 

 

flash).

beeps* sounded. Switch off the appliance using the ON/OFF button, turn on the

 

 

 

 

tap and switch the appliance back on after 20 seconds by pressing the same

 

 

 

 

button. Re-program the appliance and restart the wash cycle.

 

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

 

 

 

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

 

 

 

(the Washing, Drying and End

Make sure the water inlet filter has not become blocked by impurities (see “Care

 

 

 

indicator lights flashes).

and maintenance” chapter).

 

 

*Only available in selected models.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Fdeb 31010 Experience Instructions for useProduct Fiche Product ficheSaving energy and respecting the environment Precautions and safety adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Installation Positioning and levellingElectrical Connection Anti-condensation strip Connecting the water suppliesConnecting the water inlet hose Sink Waste SystemAnti-flooding protection Advice regarding the first wash cycleControl panel Description of the applianceUpper rack Loading the racksLower rack Cutlery basketUnsuitable crockery Tip-up compartments with adjustable positionAdjusting the height of the upper rack Cutlery trayStart-up and use Starting the dishwasherMeasuring out the detergent Wash cycle Wash cyclesMeasuring out the rinse aid Rinse-aid dispenser settingSetting the water hardness Rinse aid and refined saltCare and maintenance Problem Possible causes / Solutions TroubleshootingEssential Contact Information After Sales ServiceAfter Sales Service Parts and AccessoriesExtended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage Page 195112957.02

fdeb 31010 specifications

The Hotpoint FDEB 31010 is a highly regarded model in the realm of freestanding tumble dryers, designed to deliver efficient performance and user-friendly features. One of its standout characteristics is its generous 9 kg capacity, making it an ideal choice for larger households. This ample space allows users to dry more laundry in a single cycle, which not only saves time but also energy.

One of the key technologies integrated into the FDEB 31010 is its sensor drying capability. This innovative feature automatically detects the moisture level in the clothes and adjusts the drying time accordingly. As a result, users can avoid over-drying, protecting their garments from damage while also conserving energy. The dryer offers various drying programs tailored to different fabric types, ensuring optimal care for everything from delicates to cotton.

The Hotpoint FDEB 31010 also stands out for its ease of use. It features a simple and intuitive control panel, allowing users to select their preferred drying program quickly. The delay timer function is another convenient addition, enabling users to set the machine to start at a later time, which is perfect for taking advantage of off-peak electricity rates.

Energy efficiency is a significant consideration in today’s appliances, and the FDEB 31010 addresses this by boasting a B energy rating. While not the highest rating available, it still offers a commendable balance between performance and energy consumption, translating into savings on the utility bills.

Maintenance is made simple with the dryer’s easy-to-access filter and water tank. Regular cleaning of these components not only enhances drying performance but also prolongs the life of the appliance.

In terms of design, the Hotpoint FDEB 31010 features a modern aesthetic that can seamlessly blend into various laundry room styles. Its sturdy build ensures durability, while the white finish adds a classic touch.

In summary, the Hotpoint FDEB 31010 is an excellent choice for families and individuals seeking a reliable tumble dryer. With its generous capacity, advanced drying technologies, user-friendly interface, and energy-efficient operation, it meets the demands of contemporary laundry needs, making it a valuable addition to any home.
Top Page Image Contents