Hotpoint LSB 5B019 manual Start-up and use, Starting the dishwasher, Measuring out the detergent

Page 11

Start-up and use

Starting the dishwasher

1.Turn the water tap on.

2.Press the ON/OFF button:

3.Open the door and pour in a suitable amount of detergent.

4.Load the racks (see Loading the racks) and shut the door.

5.Select the wash cycle by turning the WASH CYCLE SELECT knob clockwise: align the notch in the knob with the number/symbol representing the desired wash cycle. The START/PAUSE indicator light will go on.

6.Select the wash options* (see Special wash cycles and options.)

7.Start the cycle by pressing the Start/Pause button: a beep will sound* and the indicator light corresponding to the wash phase will go on to signal that the cycle has begun.

8.At the end a few beeps * will signal the end of the wash cycle and the END indicator light will go on. Switch off the appliance by pressing the ON/OFF button, shut off the water tap and unplug the appliance from the electricity socket.

9.Wait a few minutes before removing the crockery to avoid getting burnt. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during certain periods of inactivity in order to minimise electricity consumption.

Changing a wash cycle in progress

If a mistake was made in the wash cycle selection process, it is possible to change the cycle provided that it has only just begun: once the wash cycle has started, in order to change the wash cycle switch off the machine by pressing and holding the ON/OFF/Reset button. Switch it back on using the same button and select the desired wash cycle and options.

Adding extra crockery

Press the Start/Pause button - the corresponding indicator light will flash. Open the door, taking care to avoid the escaping steam, and place the crockery inside the appliance. Press the Start/Pause button (fixed light): the cycle starts again.

If the Start/Pause button is pressed so as to pause the machine, both the wash cycle and the Delayed Start function (if selected) are interrupted.

At this stage the wash cycle cannot be changed.

Accidental interruptions

If the door is opened during the wash cycle or there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply restored.

Measuring out the detergent

 

GB

A good wash result also depends on the correct

 

amount of detergent being used. Exceeding the stated

 

amount does not result in a more effective wash and

 

increases environmental pollution.

 

Based on how soiled the items are, the amount can be adjusted to individual cases using powder or liquid detergent.

In the case of normally soiled items, use approximately either 35 gr (powder detergent) or 35 ml (liquid detergent). If tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

For good washing results also follow the instructions shown on the detergent box.

For further questions please ask the detergent producers' Advice Offices.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only. Place the amount of detergent for pre-washing directly inside the tub.

1.When measuring out the detergent refer to the Table of wash cycles to add the proper quantity.

Compartment B comprises a level showing the maximum quantity of liquid or powder detergent that can be added to each cycle.

2.Remove detergent residues from the edges of the dispenser and close the cover until it clicks.

3.Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place.

The detergent dispenser automatically opens up at the right time according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS option, because it adjusts the cycle so that the best washing and drying results are always achieved.

Only use detergent which has been specifically designed for dishwashers.

DO NOT USE washing-up liquid.

Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended.

The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option.

To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used.

*Only available in selected models.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Instructions for use ContentsHotpoint Product FicheSaving energy and respecting the environment Precautions and safety adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Electrical Connection InstallationPositioning and levelling Anti-condensation strip Connecting the water suppliesConnecting the water inlet hose Sink Waste SystemAnti-flooding protection Advice regarding the first wash cycleControl panel Description of the applianceUpper rack Loading the racksLower rack Cutlery basketUnsuitable crockery Tip-up compartments with adjustable positionAdjusting the height of the upper rack Cutlery trayMeasuring out the detergent Start-up and useStarting the dishwasher Instructions on wash-cycle selection and detergent dosage Wash cyclesMeasuring out the rinse aid Rinse-aid dispenser settingSetting the water hardness Rinse aid and refined saltCare and maintenance Problem Possible causes / Solutions TroubleshootingEssential Contact Information After Sales ServiceAfter Sales Service Parts and AccessoriesExtended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage Page 195113592.02

LSB 5B019 specifications

The Hotpoint LSB 5B019 is a modern and efficient built-in microwave oven designed to complement contemporary kitchens while offering a range of features to simplify cooking. This appliance stands out for its user-friendly design and innovative technologies, which cater to the needs of busy households.

One of the main features of the Hotpoint LSB 5B019 is its 900 watts of microwave power, providing quick and even cooking results. The microwave includes multiple power levels, allowing users to choose the perfect setting for various dishes, from warming leftovers to cooking full meals. Additionally, the 25-liter capacity offers ample space to accommodate a variety of container sizes, making it versatile enough for different cooking needs.

In terms of cooking functions, the Hotpoint LSB 5B019 boasts several pre-programmed settings that simplify meal preparation. The automatic cooking programs are designed to eliminate guesswork, ensuring that food is cooked precisely. This feature is particularly useful for those who may not be as confident in their cooking skills, as it takes the uncertainty out of timing and temperature.

The microwave's defrost function is another highlight, allowing users to quickly and efficiently thaw frozen food without cooking it. This is especially beneficial for busy families who often need to prepare meals from frozen ingredients.

Aesthetics and convenience also play a significant role in the design of the Hotpoint LSB 5B019. Its sleek stainless steel finish not only adds a modern touch to the kitchen but is also easy to clean. The intuitive control panel features a digital display, making it simple for users to navigate through the various settings.

Moreover, the appliance is engineered with energy efficiency in mind, helping users minimize their energy consumption and reduce utility bills. This aspect is increasingly important in today’s eco-conscious world, where sustainability is a priority for many consumers.

In summary, the Hotpoint LSB 5B019 is a reliable and feature-packed built-in microwave that brings convenience to everyday cooking. With its powerful performance, user-friendly controls, and thoughtful design, it is an excellent addition to any modern kitchen, catering to both culinary novices and seasoned chefs alike.
Top Page Image Contents