Hotpoint LSB 5B019 manual Troubleshooting, Problem Possible causes / Solutions

Page 15

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

GB

 

 

 

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

 

The dishwasher cannot be started or

• Switch off the appliance by pressing the ON/OFF button. Switch it back

 

 

 

on after approximately one minute and reset the program.

 

 

 

controlled.

• The appliance has not been plugged in properly.

 

 

 

 

• The dishwasher door has not been shut properly.

 

 

 

The door won’t close.

• The lock was released. Strongly push the door until a “clacking” noise is

 

 

 

heard.

 

 

 

 

 

 

 

No water drains from the

• The dishwasher cycle has not finished yet.

 

 

 

• The water drain hose is bent (see Installation.)

 

 

 

dishwasher.

• The drain duct is blocked.

 

 

 

 

• The filter is clogged up with food residues.

 

 

 

 

• The dishes are rattling against each other or against the sprayer arms.

 

 

 

The dishwasher is too noisy.

• An excessive amount of foam has been produced: the detergent has not

 

 

 

been measured out correctly or it is not suitable for use in dishwashers

 

 

 

 

 

 

 

 

(see Start-up and use.)

 

 

 

The dishes and glasses are

• The level of refined salt is low or the dosage setting is not suited to the

 

 

 

hardness of the water (see Rinse aid and salt.)

 

 

 

covered in a white film or

 

 

 

• The lid on the salt dispenser was not closed properly.

 

 

 

limescale deposits.

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

 

 

 

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

 

 

 

streaked or have a bluish tinge.

 

 

 

 

 

 

 

 

• A wash cycle without a drying cycle has been selected.

 

 

 

The crockery has not been dried

• The rinse aid has been used up or the dosage is too low (see Rinse aid

 

 

 

and salt.)

 

 

 

properly.

 

 

 

• The rinse aid setting is not suitable.

 

 

 

 

 

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

 

 

• The racks are overloaded (see Loading the racks.)

 

 

 

 

• The crockery has not been arranged properly.

 

 

 

 

• The sprayer arms cannot move freely.

 

 

 

 

• The wash cycle is too gentle (see Wash cycles.)

 

 

 

The crockery is not clean.

• An excessive amount of foam has been produced: the detergent has not

 

 

 

been measured out correctly or it is not suitable for use in dishwashers

 

 

 

 

 

 

 

 

(see Start-up and use.)

 

 

 

 

• The lid on the rinse aid compartment was not shut correctly.

 

 

 

 

• The filter is dirty or blocked (see Care and maintenance.)

 

 

 

 

• The refined salt level is low (see Rinse aid and salt.)

 

 

 

 

• There is no water in the mains supply.

 

 

 

The dishwasher does not take any

• The water inlet hose is bent (see Installation.)

 

 

 

• Turn on the tap and the appliance will start after a few minutes.

 

 

 

water in - Tap shut-off alarm.

 

 

 

Beeps are heard * and the Washing

 

 

 

 

indicator light is flashing quickly.

 

 

 

 

Beeps are heard* and the Drying and End

• The appliance stopped because no action was taken when the beep

 

 

 

indicator lights are flashing quickly.

sounded*.

 

 

 

Switch off the machine using the ON/OFF button, turn on the tap and

 

 

 

 

 

 

 

 

switch the machine back on after a few seconds by pressing the same

 

 

 

 

button. Re-program the appliance and restart the wash cycle.

 

 

*Only available in selected models.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructions for use ContentsHotpoint Product FicheSaving energy and respecting the environment Precautions and safety adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Installation Positioning and levellingElectrical Connection Anti-condensation strip Connecting the water suppliesConnecting the water inlet hose Sink Waste SystemAnti-flooding protection Advice regarding the first wash cycleControl panel Description of the applianceUpper rack Loading the racksLower rack Cutlery basketUnsuitable crockery Tip-up compartments with adjustable positionAdjusting the height of the upper rack Cutlery trayStart-up and use Starting the dishwasherMeasuring out the detergent Instructions on wash-cycle selection and detergent dosage Wash cyclesMeasuring out the rinse aid Rinse-aid dispenser settingSetting the water hardness Rinse aid and refined saltCare and maintenance Problem Possible causes / Solutions TroubleshootingEssential Contact Information After Sales ServiceAfter Sales Service Parts and AccessoriesExtended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage Page 195113592.02

LSB 5B019 specifications

The Hotpoint LSB 5B019 is a modern and efficient built-in microwave oven designed to complement contemporary kitchens while offering a range of features to simplify cooking. This appliance stands out for its user-friendly design and innovative technologies, which cater to the needs of busy households.

One of the main features of the Hotpoint LSB 5B019 is its 900 watts of microwave power, providing quick and even cooking results. The microwave includes multiple power levels, allowing users to choose the perfect setting for various dishes, from warming leftovers to cooking full meals. Additionally, the 25-liter capacity offers ample space to accommodate a variety of container sizes, making it versatile enough for different cooking needs.

In terms of cooking functions, the Hotpoint LSB 5B019 boasts several pre-programmed settings that simplify meal preparation. The automatic cooking programs are designed to eliminate guesswork, ensuring that food is cooked precisely. This feature is particularly useful for those who may not be as confident in their cooking skills, as it takes the uncertainty out of timing and temperature.

The microwave's defrost function is another highlight, allowing users to quickly and efficiently thaw frozen food without cooking it. This is especially beneficial for busy families who often need to prepare meals from frozen ingredients.

Aesthetics and convenience also play a significant role in the design of the Hotpoint LSB 5B019. Its sleek stainless steel finish not only adds a modern touch to the kitchen but is also easy to clean. The intuitive control panel features a digital display, making it simple for users to navigate through the various settings.

Moreover, the appliance is engineered with energy efficiency in mind, helping users minimize their energy consumption and reduce utility bills. This aspect is increasingly important in today’s eco-conscious world, where sustainability is a priority for many consumers.

In summary, the Hotpoint LSB 5B019 is a reliable and feature-packed built-in microwave that brings convenience to everyday cooking. With its powerful performance, user-friendly controls, and thoughtful design, it is an excellent addition to any modern kitchen, catering to both culinary novices and seasoned chefs alike.
Top Page Image Contents