Hotpoint LSB 5B019 Connecting the water supplies, Sink Waste System, Anti-condensation strip

Page 6

GB

 

 

The Company shall not be held responsible for any

 

 

incidents that occur if these regulations are not observed.

 

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.

Technical data

Dimensions

width 59,5 cm

height 82 cm

 

 

 

depth 57 cm

Capacity

13 standard place-settings

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

7,25 – 145 psi

Power supply voltage

See appliance data plate

 

 

 

 

Total absorbed power

See appliance data plate

 

 

 

 

Fuse

See appliance data plate

 

 

 

This dishwasher conforms to the

 

 

 

following European Community

 

 

 

Directives:

 

 

 

-2006/95/EC (Low Voltage)

 

 

 

-2004/108/EC (Electromagnetic

 

 

 

Compatibility)

 

 

 

-2009/125/EC (Comm. Reg.

 

 

 

1016/2010) (Ecodesign)

 

 

 

-97/17/EC (Labelling)

 

 

 

-2012/19/EU Waste Electrical

 

 

 

and Electronic Equipment

 

 

 

(WEEE)

 

 

 

Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor/surface where the dishwasher rests (A).

before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

Untie the end of the GREY drainage hose from the rear of the appliance.

If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

*Only available in selected models.

6

Image 6
Contents Contents Instructions for useProduct Fiche HotpointDisposal of old electrical appliances Precautions and safety adviceGeneral safety Saving energy and respecting the environmentRecycling & Disposal Information Installation Positioning and levellingElectrical Connection Sink Waste System Connecting the water suppliesConnecting the water inlet hose Anti-condensation stripAdvice regarding the first wash cycle Anti-flooding protectionDescription of the appliance Control panelCutlery basket Loading the racksLower rack Upper rackCutlery tray Tip-up compartments with adjustable positionAdjusting the height of the upper rack Unsuitable crockeryStart-up and use Starting the dishwasherMeasuring out the detergent Wash cycles Instructions on wash-cycle selection and detergent dosageRinse aid and refined salt Rinse-aid dispenser settingSetting the water hardness Measuring out the rinse aidCare and maintenance Troubleshooting Problem Possible causes / SolutionsParts and Accessories After Sales ServiceAfter Sales Service Essential Contact InformationYear Parts Guarantee GuaranteeMonths Parts and Labour Guarantee Extended GuaranteesPage Page 195113592.02

LSB 5B019 specifications

The Hotpoint LSB 5B019 is a modern and efficient built-in microwave oven designed to complement contemporary kitchens while offering a range of features to simplify cooking. This appliance stands out for its user-friendly design and innovative technologies, which cater to the needs of busy households.

One of the main features of the Hotpoint LSB 5B019 is its 900 watts of microwave power, providing quick and even cooking results. The microwave includes multiple power levels, allowing users to choose the perfect setting for various dishes, from warming leftovers to cooking full meals. Additionally, the 25-liter capacity offers ample space to accommodate a variety of container sizes, making it versatile enough for different cooking needs.

In terms of cooking functions, the Hotpoint LSB 5B019 boasts several pre-programmed settings that simplify meal preparation. The automatic cooking programs are designed to eliminate guesswork, ensuring that food is cooked precisely. This feature is particularly useful for those who may not be as confident in their cooking skills, as it takes the uncertainty out of timing and temperature.

The microwave's defrost function is another highlight, allowing users to quickly and efficiently thaw frozen food without cooking it. This is especially beneficial for busy families who often need to prepare meals from frozen ingredients.

Aesthetics and convenience also play a significant role in the design of the Hotpoint LSB 5B019. Its sleek stainless steel finish not only adds a modern touch to the kitchen but is also easy to clean. The intuitive control panel features a digital display, making it simple for users to navigate through the various settings.

Moreover, the appliance is engineered with energy efficiency in mind, helping users minimize their energy consumption and reduce utility bills. This aspect is increasingly important in today’s eco-conscious world, where sustainability is a priority for many consumers.

In summary, the Hotpoint LSB 5B019 is a reliable and feature-packed built-in microwave that brings convenience to everyday cooking. With its powerful performance, user-friendly controls, and thoughtful design, it is an excellent addition to any modern kitchen, catering to both culinary novices and seasoned chefs alike.