Hotpoint FDYB 11011, FDYB 10011 manual Troubleshooting, Problem Possible causes / Solutions

Page 15

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

 

 

 

cannot be controlled

approximately one minute and reset the program.

 

 

 

 

• The appliance has not been plugged in properly.

 

 

 

 

• The dishwasher door has not been shut properly.

 

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

 

 

 

dishwasher.

• The water inlet hose is bent (see Installation).

 

 

 

 

• The drain duct is blocked.

 

 

 

 

• The filter is clogged up with food residues.

 

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

 

 

 

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

 

and use).

 

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

 

 

 

covered in a white film or

hardness of the water (see Rinse aid and salt).

 

 

 

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

 

 

 

streaked or have a bluish tinge.

 

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

 

 

 

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

 

 

 

salt).

 

 

 

 

• The rinse aid dispenser setting is not suitable.

 

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

 

 

 

• The crockery has not been arranged well.

 

 

 

 

• The sprayer arms cannot move freely.

 

 

 

 

• The wash cycle is too gentle (see Wash cycles).

 

 

 

 

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

 

and use).

 

 

 

 

• The lid on the rinse aid compartment has not been shut correctly.

 

 

 

 

• The filter is dirty or blocked (see Care and maintenance).

 

 

 

 

• The refined salt level is low (see Rinse aid and salt).

 

 

 

The dishwasher does not take any

• There is no water in the mains supply.

 

 

 

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

 

 

 

(several short beeps are emitted*)

• Turn on the tap and the appliance will start after a few minutes.

 

 

 

(the Drying and End indicator lights

• The appliance lock has been activated because no action was taken when the

 

 

 

flash).

beeps* sounded. Switch off the appliance using the ON/OFF button, turn on the

 

 

 

 

tap and switch the appliance back on after 20 seconds by pressing the same

 

 

 

 

button. Re-program the appliance and restart the wash cycle.

 

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

 

 

 

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

 

 

 

(the Washing, Drying and End

Make sure the water inlet filter has not become blocked by impurities (see “Care

 

 

 

indicator lights flashes).

and maintenance” chapter).

 

 

*Only available in selected models.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructions for use ContentsHotpoint Product FicheSaving energy and respecting the environment Precautions and safety adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Installation Positioning and levellingElectrical Connection Anti-condensation strip Connecting the water suppliesConnecting the water inlet hose Sink Waste SystemAnti-flooding protection Advice regarding the first wash cycleControl panel Description of the applianceUpper rack Loading the racksLower rack Cutlery basketUnsuitable crockery Tip-up compartments with adjustable positionAdjusting the height of the upper rack Cutlery trayStart-up and use Starting the dishwasherMeasuring out the detergent Wash Cycle Wash cyclesMeasuring out the rinse aid Rinse-aid dispenser settingSetting the water hardness Rinse aid and refined saltCare and maintenance Problem Possible causes / Solutions TroubleshootingEssential Contact Information After Sales ServiceAfter Sales Service Parts and AccessoriesExtended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage Page 195113144.03

FDYB 11011, FDYB 10011 specifications

The Hotpoint FDYB 10011 and FDYB 11011 are innovative dishwashers designed to enhance the efficiency of modern kitchens. These models are part of Hotpoint's commitment to combining style, functionality, and energy efficiency in their appliance lineup.

Both the FDYB 10011 and FDYB 11011 come equipped with several main features that make them stand out in the crowded dishwasher market. One of the key attributes of these models is their spacious interior, which can accommodate up to 13 place settings. This means that families or those who entertain frequently will find these dishwashers particularly advantageous, as they can handle larger loads without the need for multiple cycles.

The energy efficiency of the FDYB 10011 and FDYB 11011 is another highlight, as both models boast impressive energy ratings, making them cost-effective choices for consumers. These dishwashers are designed to use less water and electricity, reducing the environmental impact while still delivering powerful cleaning performance.

In terms of technology, both models feature the innovative "Eco Technology," which optimizes water consumption and energy use during wash cycles. This means less waste without compromising cleaning effectiveness. Additionally, the "Hygiene" program is a notable inclusion that uses higher temperature settings to provide a deeper clean, killing up to 99.9% of bacteria on dishes – a significant feature for households with young children or those concerned about hygiene.

The "Intensive" wash program is another advantage, perfect for heavily soiled pots and pans. It ensures that even the toughest stains are dealt with efficiently, making post-meal cleanup easier than ever.

The design of the FDYB 10011 and FDYB 11011 is sleek and modern, fitting seamlessly into any kitchen decor. The control panel is user-friendly, featuring intuitive touch controls that make program selection straightforward.

In summary, the Hotpoint FDYB 10011 and FDYB 11011 dishwashers offer a blend of spaciousness, energy efficiency, advanced technology, and user-friendly design. With their powerful cleaning capabilities and innovative features, they cater to the needs of busy households, ensuring that dishwashing becomes a hassle-free task.
Top Page Image Contents