Hotpoint FDF-780 manual Care and maintenance

Page 12

Care and maintenance

EN

Shutting off the water and electricity

supplies

Turn off the water tap after every wash cycle to avoid

 

leaks.

Always unplug the appliance when cleaning it and

 

when performing maintenance work.

Cleaning the dishwasher

The external surfaces of the machine and the control

 

panel may be cleaned using a non-abrasive cloth

 

which has been dampened with water. Do not use

 

solvents or abrasive products.

Any marks on the inside of the appliance may be

 

removed using a cloth dampened with water and a

 

little vinegar.

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

Preventing unpleasant odours

• After several washes, check the filter assembly and if

Always keep the door of the appliance ajar in order

necessary clean it thoroughly under running water,

 

to avoid moisture from forming and being trapped

using a non-metallic brush and following the instructions

 

inside the machine.

below:

Clean the seals around the door and detergent

1. Turn the cylindrical filter C in an anti-clockwise

direction and pull it out (fig. 1).

 

dispensers regularly using a damp sponge. This will

 

2. Remove the cup filter B by exerting a slight pressure

 

avoid food becoming trapped in the seals, which is

 

on the side flaps (fig. 2).

 

the main cause behind the formation of unpleasant

 

3. Slide out the stainless steel plate filter A (fig. 3).

 

odours.

 

4. Inspect the trap and remove any food residue. NEVER

 

 

REMOVE the wash cycle pump (black detail) (fig. 4).

Cleaning the sprayer arms

 

 

 

Food residue may become encrusted onto the sprayer

 

 

 

arms and block the holes used to spray the water. It is

 

 

 

therefore recommended that the arms are checked from

 

 

 

time to time and cleaned with a small non-metallic

 

 

B

 

 

 

brush.

 

C

 

 

 

 

The two sprayer arms may both be removed.

1

 

C

 

2

To remove the upper sprayer

 

 

 

 

 

arm, rotate the locking ring in

 

 

 

an anti-clockwise direction.

 

 

 

The upper sprayer arm should

 

 

 

be replaced with the holes

 

 

 

facing upwards.

 

A

 

The lower sprayer arm can be

 

 

 

removed by pressing on the

3

4

 

 

 

 

side tabs and pulling it

 

 

 

upwards.

After cleaning the filters, replace the filter assembly and

 

fix it in position correctly; this is essential for maintaining

 

the efficient operation of the dishwasher.

 

Cleaning the water inlet filter* If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

Leaving the machine unused for extended periods

Disconnect the appliance from the electricity supply and shut off the water tap.

Leave the door of the appliance ajar.

When you return, run a wash cycle when the dishwasher is empty.

12

* Only available in selected models.

Image 12
Contents Instruction booklet Installation Advice regarding the first wash cyclePositioning and levelling Only available in selected modelsElectrical Connection ‘E’ or‘N’ ‘L’Connecting the water supplies Sink Waste System Description of the appliance Overall viewControl panel Loading the racks Lower rackCutlery basket Upper rackStart-up and use Starting the dishwasherMeasuring out the detergent Wash optionsHalf load using the upper rack Delayed startExtra drying Multi-functional tablets* TabsWash cycles Wash Wash cycle Wash cycle selectionInstructions Powder Liquid Tablets Include ±10%Adjusting the amount of rinse aid Setting the water hardnessRinse aid and refined salt Measuring out the rinse aidCare and maintenance Precautions and advice General safetyDisposal of old electrical appliances Saving energy and respecting the environmentRecycling & Disposal Information Troubleshooting Alfunction Possible causes / SolutionsAfter Sales Service Parts and AccessoriesEssential Contact Information Appliance RegistrationGuarantee Guarantee terms and conditionsPage Page 195067180.00

FDF-780 specifications

The Hotpoint FDF-780 is a standout appliance in the realm of integrated dishwashers, known for its efficiency, convenience, and modern technology. Designed to meet the demands of contemporary households, this dishwasher seamlessly blends into kitchen cabinetry, providing both a sleek appearance and functional performance.

One of the main features of the Hotpoint FDF-780 is its impressive capacity. With the ability to accommodate up to 13 place settings, this model is perfect for larger families or those who enjoy entertaining guests. The adjustable top basket is a thoughtful addition, allowing users to create extra space for taller items, ensuring that all dishes, pots, and pans come out sparkling clean.

In terms of technology, the Hotpoint FDF-780 is equipped with advanced washing programs. It offers a range of cycles including Eco, Intensive, and Quick wash options, ensuring that you can customize your cleaning based on the load and level of dirt. The Eco wash is particularly noteworthy as it promotes energy efficiency, consuming less water and electricity while still delivering outstanding results.

Another highlight of the FDF-780 is its Noise Reduction Technology, which allows the dishwasher to operate quietly. With a noise level of just around 47 dB, this appliance is perfect for open-plan living spaces, maintaining a peaceful environment even during operation.

The model also features an A+ energy rating, reflecting its commitment to energy efficiency. The efficient use of resources not only helps in reducing electricity bills but also minimizes environmental impact, making it an ideal choice for eco-conscious consumers.

With user-friendly control interfaces and an LED display, setting up and monitoring wash cycles becomes a hassle-free task. Additionally, the FDF-780 incorporates a delay timer, giving users the flexibility to run cycles during off-peak hours, further enhancing its energy efficiency.

To make maintenance easier, the FDF-780 includes a self-cleaning filter, which simplifies routine care and prolongs the machine's life. The durable design and high-quality materials ensure that this appliance is built to withstand the rigors of regular use.

Overall, the Hotpoint FDF-780 integrates cutting-edge technology and thoughtful design, making it a top contender in the market for integrated dishwashers. With its combination of efficiency, capacity, and advanced features, it represents a practical, stylish solution for any modern kitchen.