Hotpoint HDA797K, HUA787K Cycle selection hink, What happens in each cycle, For Plate WA~ER cycle

●For PLATE WA~ER cycle:

a. Load clean plates and dishes to be warmed.

b. Select DRYING HEAT–ON drying option.

c. Uave the door unlatched.

LIGHT WASH ■
ON ■
OFF ■	●	. RINSE ::;;.:

HOLO HEATW

@

PLATE WARMER

■ SCLE~DRYIN. HEAT%

d. Slowly turn Cycle Indicator Dial clockwise to PLATE WARMER position.

e. Latch the door to start the cycle.

Cycle selection hink

It is important to follow the loading instructions on pages 8 and 9.

P~S & PANS—For items such as pots, pans, cookware, dishes and glasses with heavy soil. Everyday dishes may be included.

NORMAL WASH—For most loads of everyday dishes, glasses and cookware with medium soils.

LIGHT WASH—For dishes that have been pre-rinsed before loading. Also, for washing very lightly soiled dishes with soils that have not dried on.

WNSE HOLD–For rinsing partial loads which will be washed later. Select DRYING HEAT– OFF drying option. Do not use detergent.

PLATE WARMER—For warming clean dishes and serving plates for the serving of hot food.

What happens in each cycle

Minimum
Wash
Dycle Time
(approx.	Cycle Sequence
= minutes)

POTS& PANS 12.6 ‘ 5 * wmmBmaE

NOMAL WASH	10.7	55*	WWWWWE
LIGHT WASH	7.1	43*	HEEE
RINSE HOLD	3.6	11	Rinse	I	I Rinse 1,
			——,

*DRYING HEAT—ON: Add 29minutes.

●You’ll hear occasional clicking sounds:

—Soft food disposer shredding action.

—Drain valve opening to pump water out.

—Timer control as cycle progresses.

—Detergent cup opening.

●During the drying period: —The motor stops.

–Water vapor is released through the vent under the door handle. It maybe visible.

5