Hotpoint HDA489 warranty Good dishwashing starts with HOT water, How to use a rinse agent

Page 6

Good dishwashing starts with HOT water.

To get dishes clean and dry, you need hot water. To help you get water of the proper temperature,

your dishwasher automatically heats the water in the wash cycle.

For good washing and drying, the entering water must be at least 120°F. To prevent dish damage, inlet water should not exceed 1500F.

How to test water temperature:

Higher water temperature is needed to dissolve grease and activate powder detergents. Check your water temperature with a candy or meat thermometer. Turn on the hot water faucet nearest the dishwasher. Put the thermometer in a glass and let the water run continuously into the glass until the temperature stops rising. [f the water temperature is below 120°F adjust your water heater.

Helpful hints: If outside temperatures are unusually low, or if your water travels a long distance from water heater to dishwasher, you may need to set your water heater’s thermostat up. If you have not used hot water for some time, the water in the pipes will be cold. Turn on the hot water faucet at the sink and allow it to run until the water is hot. Then start the dishwasher. If you’ve recently done laundry or run hot water for showers, give your water heater time to recover before operating the dishwasher.

To improve washability if the water is less than 120°F and you cannot adjust your water heater: Select a longer cycle and fill both detergent cups at least half-full with detergent.

How to use a rinse agent...

A rinse agent makes water flow off dishes quicker than usual. This lessens water spotting and makes drying faster, too.

For best dishwashing performance, use of a rinse agent such as JET- DRY brand is recommended.

Rinse agents come in either liquid or solid form. Your dishwasher uses the liquid form.

How to fill the rinse agent dispenser. Unscrew the cap. Add the liquid rinse agent until it just reaches the bottom of the 1 ip inside the dispenser opening. Replace the cap. The dispenser automatically releases the rinse agent into the final rinse water.

If you accidentally spill: Wipe up the rinse agent with a damp cloth. Don’t leave the spill in the dishwasher. It can keep your detergent from working.

If you can’t find any rinse agent, write:

BENCKISER CONSUMER PRODUCTS, INC. (“JET-DRY”)

41 I W. Putnam Ave. Greenwich, CT 06830

,

‘ /’

\, 3..

D

Q/

G:

How to choose and use the right detergent.

First, use only powder or liquid detergent specifically made for use in dishwashers. Other types will cause oversudsing.

Second, check the phosphate content. Phosphate helps prevent hard-water materials from forming spots or film on your dishes. If your water is hard (7 grains or more), your detergent has to work harder. Detergents with a higher phosphate level will probably work better. If the phosphate content is low (8.7% or less), you’ll have to use extra detergent with hard water.

Your water department can tell you how hard your water is. So can your county extension agent. Or your area’s water softener company. Just call and ask them how many “grains” of hardness is in your water.

How much detergent should you use? That depends. 1s your water “hard” or “soft’”? With hard water, you need extra detergent to get dishes clean. With soft water, you need less detergent.

Too much detergent with soft water not only wastes money, it can be harmful. It can cause a permanent cloudiness of glassware, called “etching.” An outside layer of glass is etched away! But why take a chance when it’s etisy to find out the hardness of your water.

Keep your detergent fresh and dry. Under the sink isn’t a good place to store detergent. Too much moisture. Don’t put powder detergent into the dispenser until you’re ready to wash dishes, either. (It won’t be fresh OR dry.)

If your powder detergent gets old or lumpy, throw it away. Old detergent often won’t dissolve. If you use a liquid dishwasher detergent, these precautions are not necessary because liquid detergents don’t “lump” as they age or come in contact with water.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Registration Problem Solver Air Gap Soil LevelPlate Warmer 800.626.2000 Help us help you Energy-Sating tipsEyou need sefice Important Safety Instructions To minimize the possibility of injuryHow to operate your dishwasher Cycle selection hints What happens in each cycleDuring the drying period -The motor stops during drying How to use a rinse agent How to choose and use the right detergentGood dishwashing starts with HOT water How to prepare the dishes for washing Detergent Usage Guide powder or liquidSO~ Water Medium Water Hard Water How to load your dishwasher How to load the Bottom Rack PrecautionForget a dish? Here’s when you can add it Questions? Use This Problem Solver Problem Solver Chipping of ChinaBO~OM TUB Small AmountWA~R STAND~G OUT of the TUBTurn the panel around and put the color you want in front Care and CleaningHow to change color panels Order from’~, .,, ~ Warranty

HDA489 specifications

The Hotpoint HDA489 is a versatile and efficient dishwasher designed for modern households seeking performance combined with convenience. This appliance stands out in the crowded market of dishwashers with its array of features, advanced technologies, and user-friendly characteristics aimed at delivering exceptional cleaning results.

One of the key features of the Hotpoint HDA489 is its impressive cleaning performance. The dishwasher is equipped with multiple wash cycles tailored for different types of loads. From heavy-duty pots and pans to delicate glassware, the HDA489 has cycles designed to tackle every dishwashing challenge. The high-temperature wash cycle effectively sanitizes dishes, making it ideal for families with small children or for those who prioritize hygiene.

Energy efficiency is another highlight of the Hotpoint HDA489. With its ENERGY STAR certification, this model ensures that it consumes less water and electricity without compromising on performance. This not only saves money on utility bills but also contributes to a more sustainable household.

The HDA489 features a spacious interior with an adjustable rack system, allowing users to maximize their loading efficiency. The upper rack can be rearranged to accommodate larger items or tall glasses, while the lower rack is designed to hold larger dishes and pans securely. This flexibility ensures that every load is optimally loaded, enhancing cleaning effectiveness.

Another standout technology in the Hotpoint HDA489 is the soil sensor. This intelligent system assesses the level of dirtiness in the water and adjusts the wash cycle accordingly. By prolonging the wash for heavily soiled items and shortening it for lightly soiled dishes, the soil sensor optimizes energy and water use.

The dishwasher operates quietly, thanks to its advanced sound insulation, making it suitable for open-concept living spaces where noise levels can be a concern. With a noise level of around 55 decibels, the HDA489 ensures that household activities can continue uninterrupted while the dishwasher is running.

Additionally, the Hotpoint HDA489 is designed with user convenience in mind. Intuitive controls and a clear digital display make it easy to select cycles, start, pause, or customize settings as needed. The delay start feature also allows users to set the dishwasher to run at their convenience, further enhancing its usability.

In summary, the Hotpoint HDA489 offers a blend of effective cleaning, energy efficiency, and user-friendly design. With various wash cycles, intelligent technologies, and a spacious interior, it shines as a reliable dishwasher solution for modern kitchens.
Top Page Image Contents