Hotpoint HDA6009 warranty Glassware, To remove stubborn spots and film from glassware

Page 15

PROBLEM

SPOTS AND FILMING ON GLASSES AND FLATWARE

CLOUDINESS ON

GLASSWARE

CHIPPING OF CHINA

POSSIBLE CAUSE

Spotting can be caused by all these things:

c Extremely hard water. (See How to Choose and Use Detergent section).

●Low inlet water temperature. (See How to Test Water Temperature section).

●Overloading the dishwasher.

●Improper loading. (See Loading section).

. Old or damp powder detergent.

●Phosphate level in detergent too low. (See How to Choose and Use Detergent section).

●Rinse agent dispenser empty. (See How to Use a Rinse Agent section).

●Too little detergent. (See How to Choose and Use Detergent section).

Local water conditions and personal preferences vary. Try several brands of detergents to find one that gives the best results for you. A liquid dishwasher detergent may help reduce filming.

To remove stubborn spots and film from glassware:

1.Remove all metal utensils from the dishwasher.

2.Do not add detergent.

3.Select POTS & PANS cycle.

4.Start the dishwasher and allow to run for 18 to 22 minutes. The dishwasher will now be in the main wash.

5.Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of the dishwasher.

6.Close the door and allow to complete the cycle.

If vinegar rinse doesn’t work: Repeat as above, except use 1/4 cup (60 ml) of citric acid crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours doesn’t, call GE Factory Service).

Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home water softener.

If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching.” The film cannot be removed.

It can be prevented: Use less detergent if you have soft water. Wash glassware in the shortest cycle that will get them clean.

Water temperature entering dishwasher exceeds 150°F.

Rough handling can cause chipping. Load with care. Make sure glassware and china are secure and can’t jar loose. (See Loading section). Make sure tall glasses and stemware will clear the top of the tub when you push the rack into the dishwasher.

Always use the top rack for delicate items.

(continued next page)

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Dkhwmher If you received Damaged dishwasher ~ YOU Need ServiceSave time and money. Before you request service Help US Help YOUTo minimize the possibility of inju~ Save These InstructionsBLatchthedo’r HOW to Operate Your DishwasherCycle Selection Hints What Happens in Each CycleGood dishwashing starts with HOT water How to Test Water Temperature How to Use a Rinse AgentHow to Choose and Use the Right Detergent How to Prepare the Dishes for Washing Detergent Usage Guide powder or liquidUse no detergent HOW to Load the TOP Rack HOW to Load Your DishwasherHOW to Load T‘HE Bottom WCK Shelf UpShelf Down Precaution HOW to Load Tm Bottom WCKSubhead that goes all the way across Forget a dish? Here’s when you can add itBuilt-in Dishwashers Often Use an Air Gap. Keep It Clean CAm Am CleaningHow to change the door panel QUESTIONS? USE this Problem SolverTo remove stubborn spots and film from glassware GlasswareOUT of the TUB ~ Problem Solver~ Kit GPF Order FormHotpoint Wdll Be There Warranty
Top Page Image Contents