How to use Faucet=Flo nozzle | Hotpoint Dishwasher manual

How to use the Unicouple on convertible models

Before operating your convertible dishwasher the first time...

Aitach the Aerator Faucet Adapter

The special aerator faucet adapter supplied with your dishwasher must be assembled to the sink faucet spout before you can use your dishwasher.

The faucet adapter is designed to fit standard spouts having internal or external threads. You will find the adapter and two washers in the “Hardware for Installation” packet in your dishwasher.

To install faucet adapter, first remove the old aerator or trim ring on your faucet spout.

If faucet has external threads:

Insert the thinner of the two washers into the faucet adapter

ld attach it to the faucet spout.

faucet has internal threads:

%= /.1

Insert both washers into the fauc adapter and attach it to the faucet spout.

If the faucet adapter threads do not match your faucet spout,

your local hardware or plumbing supply store normally has additional fittings to adapt your faucet spout to the special aerator faucet adapter.

NOTE: A sink spray attachment hose can burst if it is installed on the same sink with your dishwashe~ We suggest that you disconnect the sink spray attachment if your sink has one and plug the hole.

How to connect the Unicouple on convertible models

1.Pull Unicouple and its hoses from storage compartment located at rear of dishwasher and attach it to the faucet adapter.

2.Attach the Unicouple connector

to the faucet adaDter by deDressina collar at the top of the &onnector. - When Unicouple is all the way up onto the adapter, release the collar. It will then snap into position to lock the Unicouple in place.

The Unicouple’s small hose carries water from the faucet to the dishwasher. Its large hose carries drain water to the sink. Be sure drain hose is pointing toward the sink bowl drain opening and the sink drain is open for water that will drain from your dishwasher. If your dishwasher drains into a dis- poser, operate the disposer until it is completely empty before start- ing the dishwasher.

3.Turn hot water fully on before starting the dishwasher.

How to use the

Faucet=Flo nozzle.

The Faucet-Flo nozzle is part of the Unicoupie connector. Operate the nozzle by depressing the pressure release lever on the side of the Unicouple connector. You will find the Faucet-Flo nozzle useful for several reasons:

c It allows you to flush cold water out of the hot water line so that you can better regulate your water temperature.

●It allows you to test the temperature of the water before starting your dishwasher.

If you need fresh water for personal use:

Disconnect the unicouple.

Draw your fresh water directly from your faucet.

Do not disconnect the unicouple while the dishwasher is operating.

How to disconnect the Unicouple from faucet adapter.

1.Turn off the hot water,

2.Release the water pressure by depressing the pressure release . lever. This relieves water pressure

and protects you, and the room, from severe splashing.

3.Release unicouple from faucet

by depressing the collar at the top of the unicouple connector.

How to disconnect your convertible dishwasher

1.Remove the power cord plug from the wall receptacle.

2.Disconnect unicouple from faucet adapter.

3.Shake excess water out of unicouple and return it and its hoses to the dishwasher storage compartment.

NOTE: When motor stops at the end of the final rinse, the uni- couple can be disconnected and returned to storage.

—

Dishwasher specifications

The Hotpoint LFT 2284 is an advanced, sleek dishwasher designed to enhance your kitchen experience with its efficiency and cutting-edge features. Built with the modern household in mind, this appliance stands out due to its user-friendly design, effective cleaning performance, and energy-saving technology.

One of the main features of the Hotpoint LFT 2284 is its impressive capacity. With multiple adjustable racks, this dishwasher can easily accommodate large loads, making it perfect for families and entertaining guests. The interior includes specialized compartments for cutlery and delicate items, ensuring that every piece comes out sparkling clean without damage.

The LFT 2284 is equipped with Hotpoint's innovative ActiveDry technology, which ensures thorough drying after the wash cycle. This feature utilizes natural airflow for better drying results, reducing the need for additional drying cycles, and saving energy. The dishwasher also offers an Eco Wash cycle, designed to save both energy and water, making it an environmentally friendly choice for conscious consumers.

In terms of cleaning performance, the Hotpoint LFT 2284 stands out with its multiple washing programs. From intensive cycles for heavily soiled pots and pans to quick wash options for lightly soiled dishes, this dishwasher adapts to various needs effortlessly. The adjustable wash arms ensure water reaches every corner, delivering excellent results across a variety of load types.

Noise levels are another consideration in today’s appliances, and the LFT 2284 operates at a remarkably quiet level, allowing users to run it at any time without disrupting the household. Its sleek design fits seamlessly into any kitchen aesthetic, with a simple control panel that is easy to navigate.

Reliability comes with the Hotpoint name, and the LFT 2284 is no exception. It features a durable build quality and thoughtful design that prioritizes user convenience and longevity. With a perfect balance of functionality and energy efficiency, the Hotpoint LFT 2284 is an exceptional choice for anyone seeking a reliable and effective dishwasher, making dishwashing a simple and hassle-free task. Whether it’s a regular family meal or a gathering of friends, this dishwasher is ready to handle it all with sophistication and style.