Pentair C40, C20 important safety instructions IntelliChlor Models, Power Center Overview

1

Power Center Overview

The IntelliChlor™ system comprises of a Power Center and electrolytic Cell. The Power Center converts AC electrical current to a low voltage DC current required by the IntelliChlor electrolytic cell to operate and create chlorine for the swimming pool and spa. The Power Center is connected with the pool circulation pump electrical source so that the electrolytic cell only operates when the pool pump is on. It is recommended that a pool pump timer be used to save on energy and prolong the service life of your pool pump and IntelliChlor. A timer is not included as part of the Power Center kit. The IntelliChlor Power Center can be connected to an IntelliTouch or EasyTouch system for automation control.

The Power Center enclosure can be mounted vertically on a flat surface such as a wall or post no more than 15 feet away from the cell controller. The Power Center houses the transformer, fuse, and connector to the cell. 110 VAC and 220 VAC wiring is connected at this box, with 35 VDC output to the cell controller. A

8 AMP slo-blo fuse is mounted on the bottom of the enclosure for additional protection. There are no other controls or lights on the outside of the Power Center. A green power LED indicator is mounted on the inside main board. When the Power Center is switched on, the power LED is lit.

Internal

Ground lug

Attach incoming AC wire to Power Center AC power wires (blue and brown)

Lug (Ground bonding)

Transformer

Screw terminal to EasyTouch and IntelliTouch systems

Power LED indicator

Fuse (8 AMP (slo-blo fuse)

Cell connector

IntelliChlor Power Center (model PC 100)

(cover removed)

IntelliChlor Models

The IntelliChlor salt chlorinator system models are:

•PC 100 (P/N 520556): Power Center Kit.

•IC 20 Cell (P/N 520554): Designed for pools up to 20,000 U.S. gallons (75 liters), this cell will produce approximately 0.70 pounds of chlorine per 24 hour period. This cell uses two terminal blades and five bi-polar blades making this system more cost competitive.

•IC 40 Cell (P/N 520555): Designed for pools up to 40,000 U.S. gallons (151 liters), the cell will produce approximately 1.40 pounds of chlorine per 24 hour period. This cell uses 3 terminal blades and ten bi-polar blades, five on each side of the center terminal blade. This will supply more than enough chlorine for almost any residential and many smaller commercial pools.

•IntelliChlor pass-through cell (P/N 520588): For new pool start-up.

IntelliChlor Power Center Installation Guide