Pentair C40 Warning - Important Safety Instructions Pertaining To A Risk Of Fire, Water To Acid

Models: C20 C40

1 13
Download 13 pages 20.1 Kb
Page 4
Image 4
IMPORTANT SAFETY PRECAUTIONS

ii

IMPORTANT SAFETY PRECAUTIONS

SAVE THESE INSTRUCTIONS

 WARNING - IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE,WATER TO ACID.Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background Important Notice: Attention Installer: This manual contains important information

about the installation, operation and safe use of this product. This information should be given to the owner and/or operator of this equipment.

Manual background WARNING - IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY TO PERSONS. READ AND FOLLOW ALL INSTRUCTIONS.

Before installing this product, read and follow all warning notices and instructions which are included. Failure to follow safety warnings and instructions can result in severe injury, death, or property damage. Call (800) 831-7133 for additional free copies of these instructions.

Manual background WARNING - To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.

Manual background WARNING - When mixing acid with water, ALWAYS ADD ACID TO WATER. NEVER ADD

WATER TO ACID.

Manual background WARNING - To reduce the risk of injury, service should only be attempted by a qualified Pool Service Professional.

Manual background WARNING - Do not operate electrolytic cell without proper flow or water circulation. A build-up of flammable gases will result in hazardous conditions.

Manual background CAUTION - When using IntelliChlor with an IntelliTouch system, it is recommended to wire the IntelliChlor Power Center to the pump side of the relay located in the IntelliTouch Load Center. This wiring method does not require a ground fault circuit-interrupter (GFCI) to protect the circuit. A green colored terminal (or a wire connector marked “G”, “GR”, “Ground” or “Grounding”) is provided within the terminal compartment in the Power Center transformer enclosure. To reduce risk of electric shock, connect this terminal or connector to the grounding terminal of your electric service or supply panel with a conductor equivalent in size to the circuit conductors supplying this equipment. The power supply must be interconnected with pool pump motor power source. This insures the IntelliChlor chlorinator and pool pump will switch on and off together.

Manual backgroundCAUTION - Use of chemicals other than those recommended may be hazardous. Follow the Chemical Manufacturer’s Instructions.

Manual backgroundCAUTION - Install the IntelliChlor unit a minimum of two (2) feet from the heater outlet.

Manual backgroundCAUTION - It is recommended to install a Pentair 2” CHECK VALVE (P/N 263042) between the input side of the IntelliChlor cell and the main heater output pipe.

IntelliChlor Power Center Installation Guide

Page 4
Image 4
Pentair C40, C20 Warning - Important Safety Instructions Pertaining To A Risk Of Fire, Water To Acid