Hotpoint BFT68 manual Levelling, Height Adjustment, Standpipe, Anti-flooding protection

Page 7

D ISHWASHER

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is providedwithwatersupplyanddrain hoses, which can be directed towards the left or right to facilitate appropriateinstallation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclined more than 2 degrees. If the applianceislevel,itwill helpensure its correct operation.

Height Adjustment

Insert the appliance into the cutout andthenadjusttheheightusingthe screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in

Cold water connection. Connect the cold water supply hose, inserting the small filter supplied with the dishwasher and makingsurethatitisfastenedtightly in place (see figure 2). If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher.

A

Fig.2

Drain hose connection. WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains.

IMPORTANT: For the correct operation of your dishwasher, it is essentialtocomplywiththefollowing information:-

Standpipe:

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with‘retainingflaps’,ensuretheyare insertedfullyintothestandpipe. This will prevent the pipe from jumping out during installation and use.

Sink Waste System: For under sink drainage:

Before connecting the drain hose, remove any internal restrictions - This will prevent a build up of debris which could cause a blockage.

Remove any restrictions from the waste spigot and ensure that the sealingbungisremoved.Thehose should be routed, such that it is raised to a minimum height of 800mm(31/2”).

NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm.

the clockwise or anti-clockwise direction to increase or decrease the height respectively.

Anti-flooding protection

Your dishwasher has a special system which stops the water supply in the event of leaks inside the appliance.

It is equipped with a water inlet that has a clear outer hose and an inner high pressure hose which turns bright red if it breaks.

Leaks are prevented as the clear outer hose now contains the water. It is vital that you check it on a regularbasis,ifyouseeithasturned bright red, you know you need to replace it as soon as possible.

Call for an authorised technical engineer to come and replace it.

DO NOT position the standpipe near an electrical outlet. ENSURE that the drain hose is not kinked and it is routed as shown in thediagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your householdsink.

It MUST NOT be connected to a surface water drain.

1.Untie the end of the GREY drainage hose from the rear of the appliance.

2.Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

3.If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

4.Attach the GREY drainage hose to the under sink waste disposal unit securely, using the clip and rubber tube supplied.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Instructions for Installation and Use Page Contents Page Fuses Electrical ConnectionDONOTremovetheratingplate For your SafetyAnti-flooding protection Height AdjustmentLevelling StandpipeControls Getting to know your Dishwasher97/17/CE Labelling Upperbasketandsymbol How to use your DishwasherIf you want your dishes to be perfectlydry KHQ3URJUDPPH Programme ChartScrew the cap back in place carefully Before Using your DishwasherAdjusting the water softener Unscrew the salt container cap25 gr Cleaner DishesAdding detergent If it wont closeBasket? What goes into the lower How to adjust the upperLoad examples What goes into the upperFor cleaning, use a non metallic brush Care and CleaningTurnoffthewatersupply Disconnect drain and water inlet hose Resolving minor problems yourself TroubleshootingLoading the Rinse Aid DetergentLoading the Detergent Rinse AidGenuine Parts and AccessoriesUK 08709 077 Repair Service and Information Help DeskExtended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backPage 195.036.725.00 Repair Service and Information DeskGenuine Parts and Accessories January 2003 Part no. FP154

BFT68 specifications

The Hotpoint BFT68 is an exceptional built-in oven designed for those who prioritize both functionality and style in their kitchen. Known for its innovative technologies and user-friendly features, this model reflects Hotpoint's commitment to providing high-quality appliances that cater to modern culinary needs.

One of the standout features of the Hotpoint BFT68 is its multifunction cooking capability. With multiple cooking modes, including conventional, fan-assisted, and grill settings, users can choose the most suitable method for their dishes. This versatility allows home cooks to experiment with various recipes, whether baking, roasting, or grilling, ensuring consistently excellent results.

The BFT68 is equipped with a powerful fan system that evenly circulates heat throughout the oven cavity. This feature promotes uniform cooking and browning, eliminating the hot spots often associated with traditional ovens. As a result, dishes are cooked to perfection every time, from succulent roasts to baked goods with a flawlessly crisp texture.

In terms of capacity, the Hotpoint BFT68 offers ample space for large meal preparations. The generous oven cavity can easily accommodate multiple dishes, making it ideal for families or those who enjoy entertaining guests. Additionally, the oven's adjustable shelving allows for customizable cooking arrangements, providing flexibility to suit different types of meals.

Cleaning is made simple with the BFT68's easy-clean enamel interior, which helps to minimize food residue and stains. This means less time scrubbing and more time enjoying delicious meals. The oven also comes with a self-cleaning function, ensuring that maintenance is as effortless as possible.

Energy efficiency is another notable characteristic of the Hotpoint BFT68. This model is designed to meet stringent energy-saving standards, making it an eco-friendly choice for conscientious consumers. Reduced energy consumption not only benefits the environment but also helps to lower utility bills.

Safety features are paramount in the BFT68, including a child lock function that prevents accidental operation. Additionally, the oven's cool door technology ensures that the exterior remains safe to touch, reducing the risk of burns during cooking.

In conclusion, the Hotpoint BFT68 is a top-tier built-in oven that combines advanced cooking technologies with user-friendly features. Its multifaceted cooking modes, efficient fan system, easy-clean design, and energy-saving capabilities make it a valuable addition to any kitchen. Whether you are a seasoned chef or an occasional home cook, the BFT68 is equipped to meet your culinary needs with style and efficiency.
Top Page Image Contents