Hotpoint HCM60 manual Filling the Water Tank and Coffee Bean Holder

Page 11

C

Fig. 4

C

 

FILLING THE WATER TANK AND COFFEE BEAN HOLDER

Filling the water tank

The water tank should only be filled once it has been taken out of the machine.

For a good espresso coffee, as well as using quality coffee, good water should also be used. It is therefore recommended that you empty the water tank frequently, preferably daily, and refill it with fresh water. Avoid leaving the water for too long time in the water tank.

Boiling water or other liquids may damage the coffee machine. Fill the water container daily with just cold or running drinking water.

Open the machine by lifting the handle and then pulling outwards.

Take the lid off the water tank.

Remove the tank and fill it with fresh water up to 4 cm from the top.

Place the tank in the machine and replace the lid.

Close the machine.

N.B. The machine has an LED to the left of the buttons (), that indicates when there is little water left and that it is time to refill the tank.

Filling the coffee bean container

Only fill the coffee bean container with beans for espresso coffee.

Any other substance, including ground coffee, will damage the coffee machine.

The coffee machine should not be filled with beans treated with caramel, sugar or other similar substances, instant coffee or drinks containing sugar. Sugar can damage the machine.

The coffee bean container cannot be removed for technical reasons.

Open the machine by lifting the handle and then pulling outwards.

Take the lid off the coffee bean container.

Fill the coffee bean container with coffee beans up to 2 cm from the top.

Replace the lid on the container.

Close the machine.

N.B. The machine has an LED to the left of the buttons ( ), that indicates when there is little coffee left and that it is time to fill the container.

AMC-3

￿￿

 

Image 11
Contents Built-in Coffee Maker Model HCM60 Instructions for Installation and UseAMC-3 Contents Front view Description of the MachineCorrect use Safety instructions and warningsTechnical safety Use Description and Operation Installation of the Machine AMC-3 Installation of the Machine Filling the Water Tank and Coffee Bean Holder Operationand USE Switch onSetting the grinding Setting 1 or 2 cups Setting the quantity of ground coffee to be suppliedSetting the quantity of coffee To return to the original settingSteam Preparation of the DrinksPreheating cups and pipes Preparing the coffeeFilter holder filter base hot water/steam distributor Care and CleaningFront and interior of the machine Water tankDescalingthe Machine OperatingproblemsTechnical Data Repair Service and Information Help Desk After Sales ServiceRecycling & Disposal Information GuaranteeKey Contacts After Sales Service