Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

•Slight differences in colour on the front of the oven are due to the different materials used, i.e. glass, plastic or metal.

•Any shady areas resembling grooves on the oven door glass are caused by reflections from the oven light.

•The enamel is branded at very high temperatures. This process may cause colour variations. This is normal and will not affect appliance operation in any way. The thin edges of the sheet metal cannot be entirely enamelled and may therefore appear to be unfinished. This will not affect the rust protection.

•The stainless steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. Use specialised products for the removal of stubborn stains. After cleaning, rinse and dry thoroughly. Do not use abrasive powders or corrosive substances.

•The inside of the oven should ideally be cleaned after each use, while it is still lukewarm. Use hot water and detergent, then rinse well and dry with a soft cloth. Do not use abrasive products.

•All accessories - with the exception of the sliding racks - can be washed like everyday crockery, and are even dishwasher safe.

•We recommend that detergents are not sprayed

directly onto the control panel, but that a sponge is used instead.

!Never use steam cleaners or pressure cleaners on the appliance.

Cleaning the oven door

!The door of LED INSIDE models cannot be removed.

Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

For more thorough cleaning purposes, the oven door may be removed:

1.Open the oven door fully (see diagram).

2.Use a screwdriver to lift up and turn the small levers F located on the two hinges (see diagram).

3. Grip the door on the two outer sides and close it approximately half way. Pull the door towards you, lifting it out of its slot (see diagram). To replace the door, reverse this sequence.

!The door of LED INSIDE models cannot be removed.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest Service Centre (see Assistance). We recommend that the oven is not used until the seals have been replaced.

Replacing the light bulb
	To replace the
Lamp Holder	oven light bulb:
compartment	oven light bulb:
	1. Remove the
	glass cover of the
Lamp	lamp-holder.
	2. Remove the
	light bulb and
Glass cover	replace it with a
	similar one:
	halogen lamp
	voltage 230 V,

wattage 25 W, cap G 9.

3. Replace the glass cover (see diagram).

!Do not touch the light bulb directly with your hands.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

OSX 1036U D CX, OSX 1036N D CX specifications

The Hotpoint OSX 1036N D CX and OSX 1036U D CX are innovative built-in multifunctional microwave ovens designed to enhance cooking convenience and efficiency in modern kitchens. Both models are emblematic of Hotpoint's commitment to providing high-quality appliances that combine style, functionality, and advanced technology.

One of the standout features of the Hotpoint OSX 1036N and OSX 1036U is their multifunctionality. These ovens not only serve as microwaves but also feature grill and convection cooking options, allowing for a wide range of cooking techniques. This versatility enables users to prepare anything from simple reheated meals to complex gourmet dishes, all in one appliance.

The intelligent design of these models includes a spacious cavity that can accommodate larger dishes, making them ideal for family meals or entertaining guests. The microwave offers a generous capacity of 36 liters, ensuring that there is ample space for varied cookware. Furthermore, the models come with a turntable and an adjustable shelf, optimizing the use of space and ensuring even cooking results.

Hotpoint has incorporated several advanced technologies into the OSX 1036N D CX and OSX 1036U D CX. One crucial highlight is the efficient inverter technology, which provides a consistent and even heat distribution. This feature ensures that food is cooked thoroughly, eliminating cold spots and ensuring optimal results, even for defrosting tasks. The smart sensor cooking technology automatically adjusts the cooking time and power levels based on the type of food being prepared, further adding to the ease of use.

The design of both models is sleek and modern, featuring a stylish stainless-steel finish and a user-friendly LED display. This intuitive control panel allows for easy navigation through the different functions and settings, making the cooking process smooth and hassle-free.

In terms of energy efficiency, the Hotpoint OSX 1036N D CX and OSX 1036U D CX are designed to consume less power while maintaining high performance. This aspect not only contributes to a lower energy bill but also reflects Hotpoint’s dedication to sustainability.

In summary, the Hotpoint OSX 1036N D CX and OSX 1036U D CX are exceptional microwave ovens that embody advanced technology and thoughtful design. With multifunctional capabilities, spacious interiors, and energy-efficient operations, these models represent a valuable addition to any contemporary kitchen, meeting the demands of today’s cooking enthusiasts.