Hotpoint OS 897D P /HP S manual Using the Small Space and Main Space at the same time

Page 11

recommend you place the dripping pan on shelf level

1.If you are cooking on 3 levels at the same time, we recommend you place the shelves on racks 3 and 5, and the dripping pan on rack 1.

Using the Small Space and Main Space at the same time

!Simultaneous operation is only possible when using the Creation functions

Starting the oven

1.Fit the DIVIDER to the DIVIDER shelf “D” using the pin, with the arrows turned towards the rear part of the oven. A buzzer will sound to confirm that the DIVIDER has been fitted correctly; it will then be possible to use the two Main and Small Space compartments separately or at the same time.

!The EXTRALARGE SPACE FUNCTION knob will be disabled.

!In order to improve the energy efficiency of the oven , the preheating time of the SMALL SPACE cavity lasts about 15 minutes.

!If the MAIN SPACE is set to a temperature below 175°C, in order to safeguard the cooking results, the grill function will not start: the text “OFF” will appear on the display.

2.Select the desired cooking function for each cavity by turning the SMALL SPACE FUNCTION and/or MAIN SPACE

FUNCTION knobs. The icon indicates that the Small Space has been selected and that it is therefore possible to

adjust the Small Space settings; the icon lit up on the display indicates that the Main Space has been selected and that it is therefore possible to adjust the Main Space settings.

3.Both ovens will begin the preheating stage. The temperature may be changed by turning the TEMPERATURE knob. The

indicator light flashes during the preheating stage.

4.Once the preheating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. Food may now be placed inside the oven.

5.The digits on the display become brighter to indicate which cavity you are adjusting. To modify the settings for the other

cavity, press the button. The Small Space and Main Space settings may actually be changed during simultaneous cooking:

-change the cooking function by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knob;

-change the temperature by turning the TEMPERATURE knob;

-set the cooking duration and the cooking end time;

-stop cooking by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knob to the “0” position. 6. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. The clock and programmed cooking modes which have not yet started will not be restored and must be reprogrammed.

Programming cooking

 

GB

! A cooking function must be selected before programming

can take place.

 

 

Programming is possible in all oven configurations:

 

EXTRALARGE, MAIN and SMALL SPACE, even if the latter

 

two are being used simultaneously.

 

Programming the cooking duration

1.Press the button several times until the icon and the three numerical digits on the DISPLAY begin to flash.

2.Turn the SET TIME KNOB towards “” and “ ” to adjust the duration.

3.Press the button again to confirm.

4.When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds.

• For example: it is 9:00 a.m. and a duration of 1 hour and 15 minutes is programmed. The function will stop automatically at 10:15 a.m.

Setting the end time for a cooking mode

!A cooking duration must be set before the cooking end time can be scheduled.

1.Follow steps 1 to 3 to set the duration as detailed above.

2.Next, press the button until the icon and the two digits on the DISPLAY begin to flash.

3.Turn the SET TIME KNOB towards “” and “ ” to adjust the hour value.

4.Press the button again so that the other two numerical digits on the DISPLAY begin to flash.

5.Turn the SET TIME KNOB towards “” and “ ” to adjust the minute value.

6.Press the button again to confirm.

7.When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer

sounds. Programming has been completed when the

and icons light up. The DISPLAY shows the cooking end time and the cooking duration alternately. To cancel programming, turn the FUNCTION knob to the “0” position.

Practical cooking advice

MULTILEVEL

•Use positions 1, 3, 5 and 6.

•Place the dripping pan at the bottom and the rack at the top.

BARBECUE

•Preheat the oven for 5 minutes.

•Keep the oven door closed when cooking in this mode.

•Place the dripping pan on shelf level 3. Place the rack in a position between 4 and 7, depending on how bulky the food is, and make sure the food is in the centre of the rack. Examples: beef ribs should be cooked on shelf level 4 and bacon on shelf level 6 or 7.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OS 897D P /HP S OS 897D P IX /HP S Operating InstructionsGB Warnings Rack shelf Divider shelf Control panel Description of the applianceOverall view Guides for the sliding racksSmall Space Function knob GB Description of the applianceControl panel DisplayBuilt-in appliances InstallationPositioning Electrical connectionConnecting the supply cable to the mains Fitting the power supply cableSafety measures not be observed Oven structure ExtraLarge Space Setting the clockSetting the minute minder GB Start-up and useAutomatic cooking functions Fast Cooking function Small SpaceMain Space Cooking functionsProgramming cooking Using the Small Space and Main Space at the same timePractical cooking advice Setting the end time for a cooking modeGrill Cooking advice table for the Main Space feature Cooking advice table for the Small Space featureMaintenance and care GB Precautions and tipsInspecting the seals Cleaning the oven doorAutomatic cleaning using the Fast Clean function Replacing the light bulbAt the end of the automatic cleaning cycle Safety devicesProgramming the automatic cleaning end time Essential Contact Information Afetr Sales ServiceHotpoint Service Parts and AccessoriesExtended Guarantees GB GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage 195102581.02

OS 897D P /HP S, OS 897D P IX /HP S specifications

The Hotpoint OS 897D P IX /HP S and OS 897D P /HP S are sophisticated built-in ovens designed to meet the needs of modern cooking enthusiasts. These models combine sleek aesthetics with advanced technology to elevate your culinary experience.

One of the defining features of the OS 897D series is its multifunctional capability. With multiple cooking options, including traditional fan cooking, grill, and pizza functions, these ovens allow users to explore a variety of cooking styles. The intelligent MultiFlow technology ensures that heat circulates evenly throughout the oven, providing consistent cooking results across all dishes, reducing cooking times and energy consumption. This means that whether you are baking, roasting, or grilling, you can enjoy perfectly cooked food every time.

Another significant characteristic of the Hotpoint OS 897D range is the use of a user-friendly digital display. The easy-to-navigate interface provides quick access to settings, cooking modes, and timers, allowing for effortless control over the cooking process. The programmable timer adds convenience, enabling the user to set the oven to start cooking at a specific time, which is perfect for those with busy schedules.

The design of these ovens also incorporates steam cooking capabilities, which help retain the nutrients and flavors of your food. This technology is ideal for preparing vegetables, fish, and even baked goods, resulting in dishes that are not only healthy but also bursting with flavor.

Safety is a top priority for Hotpoint, and the OS 897D P IX /HP S and OS 897D P /HP S are equipped with features like the cooling system that prevents the exterior of the oven from getting too hot during cooking. Additionally, the child lock function ensures that little hands cannot inadvertently change the settings.

The OS 897D series is also designed with ease of maintenance in mind. The self-cleaning function utilizes high temperatures to burn away residue and grease, making cleanup straightforward and hassle-free. The enamel interior further enhances ease of cleaning, ensuring that your oven remains spotless with minimal effort.

In summary, the Hotpoint OS 897D P IX /HP S and OS 897D P /HP S are exemplary built-in ovens packed with features that cater to the modern chef. With multifunctional cooking options, advanced technologies, user-friendly interfaces, and safety features, these ovens are a testament to Hotpoint's commitment to innovation and quality in kitchen appliances.
Top Page Image Contents