KNOW YOUR TIMER
This feature allows you to program the oven and the grill to:
•delay start for a specific length of time;
•immediate start for a specific length of time;
•timer.
Button Functions:
: timer - hours and minutes
: cooking time
: end cooking time
-: set cooking time - backward
+: set cooking time - forward
How to reset the digital clock.
After the appliance has been connected to the power supply, or when the power has gone out, the clock display will automatically reset to 0:00 and begin to flash.
•Press the 
and 
buttons at the same time and then reset the time (within 4 seconds) using the - and
+buttons.
The + button sets the time forward.
The - button sets the time backward.
Whenever the time needs to be reset, repeat all of the steps listed above.
Manual operation of the Oven
After resetting the time, the program automatically switches to the manual mode.
Note: To reset to manual mode after each “automatic”
cooking, Press the 
and 
buttons at the same time
Preset cooking time with delayed start
The length of the cooking program as well as the time at which the cooking program ends must be set.
If we assume that the time displayed on the timer is 10:00
1.Turn the function selector to the required cooking mode and turn the temperature selector to the desired tempe- rature (e.g. conventional oven, 200°C);
2.Press the 
button and then set the cooking time (within four seconds) using the - and + buttons. Let us
suppose that we set the cooking time at 30 minutes. The display will read as follows:
A
Release the button and after 4 seconds, the current
time will be displayed again, along with the 
symbol and the letter "A" (AUTO);
3.Press the 
button and then use the - and + buttons
to set the time for when the cooking program should end. Let us suppose this time to be 1p.m.
8
A
4.After the button has been released, the current time will be displayed after approximately 4 seconds:
A
The letter "A" will light up reminding you that the length and end cooking time were programmed in automatic mode. At this point, the oven will turn on automatically at 12:30 and then turn off after 30 minutes. When the oven is turned
on, the 
symbol will be displayed for the entire cooking time. At any time during the cooking process, the length of the cooking time can be displayed by pressing the 
button, and the end cooking time by pressing the 
button.
At the end of cooking time, a buzzer will sound for several minutes, to turn it off, simply press any of the
buttons except the - and + buttons.
Preset cooking time with immediate start
By programming just the duration (points 1 and 2 of the “Start delayed cooking with preset duration” section), cooking will start up immediately.
To cancel a preset cooking time
Press the 
and 
buttons at the same time.
Timer Feature
The timer feature allows you to enter a given amount of time from which the timer begins to count down. This feature does not turn the oven on or off, it only emits an alarm when the time has expired.
When the 
button has been pressed, the display will read as follows:
Then use the - and + buttons to set the desired time.
After the button has been released, the timer will start to count down and the current time will be displayed.
After the time has expired, an alarm will sound, which can be turned off by pressing any of the buttons (except the -
and + buttons) at this point the 
symbol will turn off.
Changing and cancellation settings
•The data entered can be changed at any time by pressing the corresponding button and the - and + buttons.
•When the data for the length of the cooking time is cancelled, the data for the end cooking time are also cancelled automatically, and vice versa.
•If the oven has been programmed, it will not accept end cooking times which are before the start of the cooking process.