Installation, Positioning | Hotpoint SX 1038N CX, SX 1038L CX

Installation

! Please keep this instruction booklet in a safe place

GB	for future reference. If the appliance is sold, given
	for future reference. If the appliance is sold, given
	away or moved, please make sure the booklet is also
	passed on to the new owners so that they may
	benefit from the advice contained within it.
	! Please read this instruction manual carefully: it
	contains important information concerning the safe
	operation, installation and maintenance of the
	appliance.

Positioning

!Do not let children play with the packaging material; it should be disposed of in accordance with local separated waste collection standards (see Precautions and tips).

!The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance operates properly:

•The panels adjacent to the oven must be made of heat-resistant material.

•Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

•To install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:

Ventilation

To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

.	45	mm	.
mm		mm	.
560

Centring and fixing

Secure the appliance to the cabinet:

•Open the oven door.

•Remove the 2 rubber plugs covering the fixing holes on the perimeter frame.

•Fix the oven to the cabinet using the 2 wood screws.

•Replace the rubber plugs.

590 mm.

595	mm.

20 mm.
570 mm.
	.
mm
550	.
mm
	.*
20,5 mm
22,5

.
mm
550 .
min
	.
mm
45
560	mm.
	mm.

575-585 mm.

!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

* Stainless steel models only

!The appliance must not come into contact with electrical parts once it has been installed.

The indications for consumption given on the data plate have been calculated for this type of installation.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24