Sunbeam 4.0L manual Sunbeam’s Safety Precautions, Deep Fryer

Page 4

Sunbeam’s Safety Precautions

 

SAFETY PRECAUTIONS FOR YOUR STAINLESS

•

Remove excess moisture and ice particles from food

 

DEEP FRYER.

 

before deep frying.

•

Before use always ensure that the internal tank is

•

Excessive moisture in oil, can cause turbulence and

 

positioned correctly in the fryer body. ie the max/min

 

could lead to overflowing.

 

level should be on the left of the fryer.

•

Check oil levels are correct before and during deep

•

Never connect the fryer to the electricity supply

 

frying.

 

without placing oil in the tank first.

•

Be careful when lifting lid during and after cooking.

•

If using solid fat, remove the lid and the basket, cut

 

Steam can result in serious burns. Never place face

 

the fat into pieces and place them directly into the

 

over deep fryer.

 

tank. Do not melt solid fat in the frying basket as it

•

Never decant oil from deep fryer while still hot.

 

may damage the appliance.

•

Do not move deep fryer once it is in use.

•

Never operate the fryer with oil level below the

•

Only use the oils recommended in this instruction

 

minimum mark or above the maximum mark.

 

booklet.

•

Do not touch any metal surfaces of the product while

•

To reduce moisture build, it is recommended to

 

it is in use as they will be hot.

 

leave the unit on for 5 minutes after cooking and

 

 

 

then allow to cool with lid off.

 

 

 

 

 

Sunbeam is very safety conscious when designing and

•

Do not use an appliance for any purpose other than

 

manufacturing consumer products, but it is essential

 

its intended use.

 

that the product user also exercise care when using

•

Do not place an appliance on or near a hot gas

 

an electrical appliance. Listed below are precautions

 

flame, electric element or on a heated oven.

 

which are essential for the safe use of an electrical

•

Do not place on top of any other appliance.

 

appliance:

 

•

Do not let the power cord of an appliance hang over

•

Read carefully and save all the instructions provided

 

the edge of a table or bench top or touch any hot

 

with an appliance.

 

 

 

surface.

•

Always turn the power off at the power outlet before

 

•

Do not operate any electrical appliance with a

 

you insert or remove a plug. Remove by grasping the

 

 

damaged cord or after the appliance has been

 

plug - do not pull on the cord.

 

 

 

damaged in any manner. If damage is suspected,

•

Turn the power off and remove the plug when the

 

 

return the appliance to the nearest Sunbeam

 

appliance is not in use and before cleaning.

 

Appointed Service Centre for examination, repair

•

Do not use your appliance with an extension cord

 

or adjustment.

 

unless this cord has been checked and tested by a

•

For additional protection, Sunbeam recommend

 

qualified technician or service person.

 

the use of a residual current device (RCD) with

•

Always use your appliance from a power outlet of the

 

a tripping current not exceeding 30mA in the

 

voltage (A.C. only) marked on the appliance.

 

electrical circuit supplying power to your appliances.

•

This appliance is not intended for use by persons

•

Do not immerse the appliance in water

 

(including children) with reduced physical, sensory

 

or any other liquid unless recommended.

 

or mental capabilities, or lack of experience and

•

Appliances are not intended to be operated

 

knowledge, unless they have been given supervision

 

by means of an external timer or separate remote

 

or instruction concerning use of the appliance by a

 

control system.

 

person responsible for their safety.

•

This appliance is intended to be used in household

•

Children should be supervised to ensure that they do

 

and similar applications such as: staff kitchen areas

 

not play with the appliance.

 

in shops, offices and other working environments;

•

The temperature of accessible surfaces may be high

 

farm houses; by clients in hotels, motels and other

 

when the appliance is operating.

 

residential type environments; bed and breakfast

•

Never leave an appliance unattended while

 

type environments.

 

in use.

 

 

If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam. com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

2

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Page Contents Sunbeam’s Safety Precautions Deep FryerCongratulations Features of your Stainless Deep Fryer Reset buttonLid Basket with 1.25kg food capacityPower on light Temperature control lightOn/off switch Cool-ZoneUsing your Stainless Deep Fryer Before using your Stainless Deep FryerSafety Feature of the thermostat Filling your Stainless Deep FryerUsing your Sunbeam Stainless Deep Fryer Cooking in your Stainless Deep FryerGeneral cooking method Cooking home battered foodHints for perfect frying Never use the fryer without oilFrying times and temperatures TypeMeat and poultry Type Fresh chicken portionsFrying times and temperatures PotatoesLid and permanent filter Care and CleaningBasket, handle and removable tank Control unit Care and CleaningNever immerse the control unit in water or any other liquid Hints for cooking the perfect frozen chip Perfect Chip1St Fry blanch 2nd fry Recipes Recipes Prawn cutletsDeep fried pork balls CalamariDim Sims Spring RollsMinted pea wontons Classic Buffalo WingsFried Cheese Scones Filling Potato dumplingsDough Green onion and sesame puffs Fried Mozzarella SticksMeat fritters Recipes continue MeatballsPotato crisps FelafelCorn fritters Kofte PotatoesApple fritters Strawberry stackButtermilk doughnuts Cinnamon sugarTroubleshooting Problem Possible cause Solution Strong smellOil overflowing Food is not browningPage Month Replacement Guarantee Need help with your appliance?

4.0L specifications

The Sunbeam 4.0L engine has garnered attention for its blend of performance, efficiency, and modern technology, making it a compelling choice for various applications, particularly in automotive and industrial sectors. As a part of the legacy of Sunbeam engineering, this engine represents a commitment to delivering powerful performance while minimizing environmental impact.

One of the standout features of the Sunbeam 4.0L engine is its design, which utilizes an aluminum alloy block and cylinder head. This lightweight construction not only contributes to overall vehicle weight reduction but also enhances thermal efficiency, allowing the engine to operate at optimal temperatures for extended durations. Coupled with a DOHC (dual overhead cam) configuration, the 4.0L engine achieves improved airflow, allowing for better combustion and increased power output.

The Sunbeam 4.0L is equipped with advanced fuel injection technology, which includes direct injection systems. This technology ensures precise fuel delivery, improving combustion efficiency and throttle response, ultimately translating to enhanced horsepower and torque across a wide RPM range. This engine also features variable valve timing, enabling it to adjust the timing of the intake and exhaust valves according to engine speed and load, ensuring that performance is optimized in both low and high-speed conditions.

Another remarkable characteristic of the Sunbeam 4.0L engine is its thoughtful integration of modern electronics. With an advanced engine control unit (ECU), the engine benefits from real-time data processing, allowing it to optimize performance based on driving conditions. This adaptability not only boosts performance but also contributes to lower emissions, aligning with contemporary environmental standards.

The Sunbeam 4.0L engine balances its performance capabilities with a focus on fuel economy. Through its engineering, the engine manages to deliver competitive fuel consumption figures, making it an attractive option for those looking to reduce operational costs without sacrificing power.

In conclusion, the Sunbeam 4.0L engine exemplifies a well-rounded approach to modern engine design, blending advanced materials, cutting-edge technologies, and a commitment to performance and efficiency. Whether in a passenger vehicle or an industrial application, the 4.0L engine stands out as a testament to the innovation driven by Sunbeam’s engineering philosophy. Its features and characteristics make it a compelling choice for both enthusiasts and practical users alike.
Top Page Image Contents