Using your Sunbeam Stainless Deep Fryer

Using your Sunbeam Stainless Deep Fryer continued

Cooking in your Stainless Deep Fryer

There are two methods of cooking in your fryer; one general method for most foodstuffs and another for home battered products.

Note: During cooking, steam will build up in the fryer, so when lifting the lid use a kitchen glove or mitt to protect your hand.

General cooking method

(For pre-cooked, crumbed, floured or wrapped food.)

1.Adjust the control dial to the desired temperature. The red temperature indicator light will illuminate.

2.When the oil has reached the required temperature, the green ready light will illuminate. Remove the lid, lift the basket and put it on the rest ➃ so that it is not in contact with the oil. Place the food, (should be as dry as possible) into the raised basket.

Note: The basket should always be in the raised position when it is to be filled with food.

➃

3.Lower the basket into the tank.

4.Do not cook food with the lid on.

5.When the food is cooked (see time guide chart on page 9), place the basket on its raised position to drain for a few seconds.

6.Remove the basket and put the fried food on a plate covered with absorbent paper or kitchen towel.

7.When finished with the fryer, turn the temperature knob to the lowest setting and switch the power off. Remove the plug from mains power.

8.Clean the fryer only after the oil is completely cooled down.

Cooking home battered food

This method allows for the fact that if wet batter is placed in the basket prior to cooking the food may stick to the basket. This method of cooking requires extreme care.

1.Adjust the control dial to the desired temperature. The red temperature indicator light will illuminate.

2.When the oil has reached the required temperature the light will go out.

Note: Leave the basket in the down position.

3.Remove the lid of the fryer.

4.Coat the food in batter and allow it to drain slightly to get rid of the excess coating.

5.Very carefully, slowly lower the coated food into the hot oil, using a suitable implement or tongs. This allows the batter to become solid and prevents it sealing to the mesh of the basket.

Note: Remember to take care as the oil may spit as the food is added.

You can now follow the instructions as given in the general cooking method, steps 4 - 8.

4.0L specifications

The Sunbeam 4.0L engine has garnered attention for its blend of performance, efficiency, and modern technology, making it a compelling choice for various applications, particularly in automotive and industrial sectors. As a part of the legacy of Sunbeam engineering, this engine represents a commitment to delivering powerful performance while minimizing environmental impact.

One of the standout features of the Sunbeam 4.0L engine is its design, which utilizes an aluminum alloy block and cylinder head. This lightweight construction not only contributes to overall vehicle weight reduction but also enhances thermal efficiency, allowing the engine to operate at optimal temperatures for extended durations. Coupled with a DOHC (dual overhead cam) configuration, the 4.0L engine achieves improved airflow, allowing for better combustion and increased power output.

The Sunbeam 4.0L is equipped with advanced fuel injection technology, which includes direct injection systems. This technology ensures precise fuel delivery, improving combustion efficiency and throttle response, ultimately translating to enhanced horsepower and torque across a wide RPM range. This engine also features variable valve timing, enabling it to adjust the timing of the intake and exhaust valves according to engine speed and load, ensuring that performance is optimized in both low and high-speed conditions.

Another remarkable characteristic of the Sunbeam 4.0L engine is its thoughtful integration of modern electronics. With an advanced engine control unit (ECU), the engine benefits from real-time data processing, allowing it to optimize performance based on driving conditions. This adaptability not only boosts performance but also contributes to lower emissions, aligning with contemporary environmental standards.

The Sunbeam 4.0L engine balances its performance capabilities with a focus on fuel economy. Through its engineering, the engine manages to deliver competitive fuel consumption figures, making it an attractive option for those looking to reduce operational costs without sacrificing power.

In conclusion, the Sunbeam 4.0L engine exemplifies a well-rounded approach to modern engine design, blending advanced materials, cutting-edge technologies, and a commitment to performance and efficiency. Whether in a passenger vehicle or an industrial application, the 4.0L engine stands out as a testament to the innovation driven by Sunbeam’s engineering philosophy. Its features and characteristics make it a compelling choice for both enthusiasts and practical users alike.