Sunbeam 4.0L Perfect Chip, Hints for cooking the perfect frozen chip, 1St Fry blanch 2nd fry

Page 15

The Perfect Chip

•For perfect fries and wedges, old potatoes are ideal. The potato should be of a low starch, waxy variety i.e. Sebago, Russet Burbank, Spunta, King Edward, Bintje.

•Make sure that the chips are cut to even size to guarantee even cooking.

•The cut chips should be rinsed under running water until the water runs clear. This removes excess starch from the potatoes, the starch burns at high temperatures.

•Dry on kitchen towel before frying.

•Remove the lid whilst cooking.

•Shake the basket at short intervals to encourage even browning and to stop chips sticking together.

•Homemade fries are double cooked. The first fry blanches the chips so that they cook through. The second fry colours the chips and gives them a crisp crust. Use the table below as a guide.

•Cooking times will vary depending on the size of your fries or chips and the variety of the potato used.

Please Note: If cooking 1kg of homemade raw potato chips, it is recommended that only 3.5 litres of oil is used.

Hints for cooking the perfect frozen chip.

•Do not defrost frozen pre-cooked chips. For the best results they should be taken directly from the freezer to the fryer.

•Heat oil to the maximum setting, 190°C.

•For best results for frozen chips refer to chip packet.

•Allow chips to drain for a moment before removing from the basket and seasoning.

 

1St Fry (blanch)

2nd fry

 

 

 

 

 

 

Thin fries - french fries

140°C

5 min

190°C

5 min

 

 

 

 

 

Thick chips

140°C

7-8 min

190°C

7-8 min

 

 

 

 

 

Wedges

140°C

10 min

180°C

10 min

Allow oil to heat up to 2nd temperature before re-immersing the basket in the hot oil.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Page Contents Deep Fryer Sunbeam’s Safety PrecautionsCongratulations Basket with 1.25kg food capacity Features of your Stainless Deep FryerReset button LidCool-Zone Power on lightTemperature control light On/off switchFilling your Stainless Deep Fryer Using your Stainless Deep FryerBefore using your Stainless Deep Fryer Safety Feature of the thermostatCooking home battered food Using your Sunbeam Stainless Deep FryerCooking in your Stainless Deep Fryer General cooking methodNever use the fryer without oil Hints for perfect fryingFresh chicken portions Frying times and temperaturesType Meat and poultry TypePotatoes Frying times and temperaturesCare and Cleaning Lid and permanent filterBasket, handle and removable tank Care and Cleaning Control unitNever immerse the control unit in water or any other liquid Perfect Chip Hints for cooking the perfect frozen chip1St Fry blanch 2nd fry Recipes Calamari RecipesPrawn cutlets Deep fried pork ballsSpring Rolls Dim SimsClassic Buffalo Wings Minted pea wontonsPotato dumplings Fried Cheese Scones FillingDough Fried Mozzarella Sticks Green onion and sesame puffsMeat fritters Felafel Recipes continueMeatballs Potato crispsStrawberry stack Corn frittersKofte Potatoes Apple frittersCinnamon sugar Buttermilk doughnutsFood is not browning TroubleshootingProblem Possible cause Solution Strong smell Oil overflowingPage Month Replacement Guarantee Need help with your appliance?

4.0L specifications

The Sunbeam 4.0L engine has garnered attention for its blend of performance, efficiency, and modern technology, making it a compelling choice for various applications, particularly in automotive and industrial sectors. As a part of the legacy of Sunbeam engineering, this engine represents a commitment to delivering powerful performance while minimizing environmental impact.

One of the standout features of the Sunbeam 4.0L engine is its design, which utilizes an aluminum alloy block and cylinder head. This lightweight construction not only contributes to overall vehicle weight reduction but also enhances thermal efficiency, allowing the engine to operate at optimal temperatures for extended durations. Coupled with a DOHC (dual overhead cam) configuration, the 4.0L engine achieves improved airflow, allowing for better combustion and increased power output.

The Sunbeam 4.0L is equipped with advanced fuel injection technology, which includes direct injection systems. This technology ensures precise fuel delivery, improving combustion efficiency and throttle response, ultimately translating to enhanced horsepower and torque across a wide RPM range. This engine also features variable valve timing, enabling it to adjust the timing of the intake and exhaust valves according to engine speed and load, ensuring that performance is optimized in both low and high-speed conditions.

Another remarkable characteristic of the Sunbeam 4.0L engine is its thoughtful integration of modern electronics. With an advanced engine control unit (ECU), the engine benefits from real-time data processing, allowing it to optimize performance based on driving conditions. This adaptability not only boosts performance but also contributes to lower emissions, aligning with contemporary environmental standards.

The Sunbeam 4.0L engine balances its performance capabilities with a focus on fuel economy. Through its engineering, the engine manages to deliver competitive fuel consumption figures, making it an attractive option for those looking to reduce operational costs without sacrificing power.

In conclusion, the Sunbeam 4.0L engine exemplifies a well-rounded approach to modern engine design, blending advanced materials, cutting-edge technologies, and a commitment to performance and efficiency. Whether in a passenger vehicle or an industrial application, the 4.0L engine stands out as a testament to the innovation driven by Sunbeam’s engineering philosophy. Its features and characteristics make it a compelling choice for both enthusiasts and practical users alike.
Top Page Image Contents