Sunbeam manual Sunbeam’s Safety Precautions, Food Processor LC7900

Sunbeam’s Safety Precautions

	SAFETY PRECAUTIONS FOR YOUR SUNBEAM	•	Avoid contacting moving parts at all times.
	FOOD PROCESSOR LC7900.	•	Place the processing bowl onto the base of the
•	Always use extreme care when handling blades and		processor before fitting any attachments.
	cutting discs. These are extremely sharp and may	•	All blades and attachments should be removed
	cause injury if handled incorrectly. Always store
			with care before cleaning.
	blades and cutting discs in their respective covers
		•	Do not over fill the processor.
	or processing containers.
		•	Do not process for longer than the time periods
•	Unplug from power outlet when not in use, before
			recommended in the operating chart.
	putting on or taking off attachments, and before
		•	Always remove the blade before emptying the
	cleaning.
•	Do not put hot liquids into the processing bowl.		processing bowl of its contents.
		•	Take care when removing the bowl from the base,
	Cool to room temperature before placing in
	processing bowl.		emptying the bowl or during fitting and removal of
			blade system, as blades are extremely sharp.
	Sunbeam is very safety conscious when designing and	•	Do not use an appliance for any purpose
	manufacturing consumer products, but it is essential		other than its intended use.
	that the product user also exercise care when using	•	Do not place an appliance on or near a hot gas
	an electrical appliance. Listed below are precautions		flame, electric element or on a heated oven.
	which are essential for the safe use of an electrical	•	Do not place on top of any other appliance.
	appliance:	•	Do not let the power cord of an appliance hang over
•	Read carefully and save all the instructions provided		the edge of a table or bench top or touch any hot
	with an appliance.		surface.
•	Always turn the power off at the power outlet before	•	Do not operate any electrical appliance with a
	you insert or remove a plug. Remove by grasping the		damaged cord or after the appliance has been
	plug - do not pull on the cord.		damaged in any manner. If damage is suspected,
•	Turn the power off and remove the plug when the		return the appliance to the nearest Sunbeam
	appliance is not in use and before cleaning.		Appointed Service Centre for examination, repair
•	Do not use your appliance with an extension cord		or adjustment.
	unless this cord has been checked and tested by a	•	For additional protection, Sunbeam recommend the
	qualified technician or service person.		use of a residual current device (RCD) with a tripping
•	Always use your appliance from a power outlet of the		current not exceeding 30mA in the electrical circuit
	voltage (A.C. only) marked on the appliance.		supplying power to your appliances.
•	This appliance is not intended for use by persons	•	Do not immerse the appliance in water or any other
	(including children) with reduced physical, sensory		liquid unless recommended.
	or mental capabilities, or lack of experience and	•	Appliances are not intended to be operated
	knowledge, unless they have been given supervision		by means of an external timer or separate remote
	or instruction concerning use of the appliance by a		control system.
	person responsible for their safety.	•	This appliance is intended to be used in household
•	Children should be supervised to ensure that they do		and similar applications such as: staff kitchen areas
	not play with the appliance.		in shops, offices and other working environments;
•	The temperature of accessible surfaces may be high		farm houses; by clients in hotels, motels and other
	when the appliance is operating.		residential type environments; bed and breakfast
•	Never leave an appliance unattended while in use.		type environments.

If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

3