Sunbeam EM8910 manual Preparing your Sunbeam Intuitive Digital

Preparing your Sunbeam Intuitive Digital

•Position the espresso machine onto a stable, flat, dry surface.

•Attach the coffee bean hopper onto the espresso machine. With the hopper in hand, align the arrow on the base of the hopper with the ‘HOPPER RELEASE’ position. When the hopper is sitting flat, push down and turn anti-clockwise so that the arrow on the base of the hopper meets with one of the other two positions;

whole beans or pre-ground coffee. See figures 1 and 2.

Figure 1

•Insert the drip tray. Simply slide the drip tray into the base of the espresso machine until it clicks into place on the right-hand side below the water reservoir. See figure 3.

•Insert the power cord into a 230-240V AC power outlet. Then open the flap of the power cord compartment and stow away the remaining cable. See figure 4.

Figure 3

Figure 2

Figure 4

9