Sunbeam EM8910 manual Running the cleaning program

Page 39

Running the cleaning program (continued)

•<<PLACE TABLET IN PRE-GROUND CHUTE >> – press “OK”

Place a cleaning tablet in the pre-ground coffee receptacle, see figure 59. Then press the “OK” button.

• <<PLEASE WAIT>>

The coffee brewing unit is positioned.

•<<WASTE CONTAINER UNDER POUR SPOUT>> – press “OK”

Remove and empty the coffee waste container. Place the emptied coffee waste container under the coffee pour spouts, see figure 60.

Note: The coffee waste container serves as a collecting vessel for the cleaning fluid.

Then press the “OK” button and the cleaning program starts.

Note: During the cleaning program the display shows the following indications alternately:

• <<CLEANING CYCLE>>

The cleaning program carries out 6 cleaning cycles. The pauses enable the cleaning solution to take effect. The cleaning cycles are counted off in the display.

• <<IN PROGRESS>>

The bar indication in the bottom line increases with the advance of the pause duration.

Note: In the event of a power failure or interruption, the program must be restarted.

The cleaning process takes approximately 8 minutes. Then the following is shown on the display:

•<<EMPTY WASTE CONTAINER>>

– Press “OK”

Empty and replace the coffee waste container. Then press the “OK” button.

• <<REFILL WATER RESERVOIR>>

Remove the water reservoir, fill with water and replace. Then press the “OK” button.

• <<CLEANING COMPLETED>>

When this message appears on the display the cleaning program has finished.

Turn the bean hopper to the desired position. The espresso machine is now ready for use and in the status of the last selected coffee mode.

Important: After running the cleaning program, you are advised to throw away the first cup of coffee from the espresso machine.

37

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Intuitive Digital Page Contents Safety Precautions for Your Sunbeam Espresso Machine Sunbeam’s Safety PrecautionsWhat makes a good coffee? About espresso coffeeFeatures of your Sunbeam Intuitive Digital Removable drip tray and cup resting grid Coffee bean hopperCoffee grind selector Control panel with LCDOr 2 cup VolumeSteam pre-selection Power Water indicator Temperature indicator Automatic rinseOne touch operation Thermoblock Heating SystemBar Pump LCD menu overview Preparing your Sunbeam Intuitive Digital Filling the machine Switching on the machineUsing the Sunbeam Intuitive Digital Switching off the machineRinsing Please Wait Hardness degree Setting the water hardnessSetting and saving the water hardness level Determining water hardnessFilling the coffee bean hopper Making an espresso with beansEXTRA-MILD Select espresso pour volume/sizeMaking an espresso with beans Selecting the strength/quantity of coffeeCancelled Please Wait Setting the number of cups and dispensing coffeeFilling the pre-ground coffee receptacle Making an espresso with pre-ground coffeeMaking an espresso with pre-ground coffee Selecting espresso pour volume/sizeRinse button See . LCD Indicates Rinsing Please Wait Secrets to the perfect cup Steam Ready Open Switch Milk frothingHeating Please Wait LCD Indicates HOT Water Milk frothingImportant cleaning instructions for the steam nozzle Easy steps for frothing milkFrothing with the frothing attachment Hot water function Programming the espresso pour volume Changing and saving the coffee strength/ quantity Programming the espresso pour volumeRemoving foreign matter from the grinding mechanism Grind setting selectionSetting the fineness of the grind Cleaning the grinding mechanismReplace the grinding ring Grind setting selectionMenu settings Setting languageSetting the coffee temperature Setting the sleep mode Menu settingsResetting the espresso machine to the factory setting Reset Care and cleaning Regular cleaningEmptying the coffee waste container Cleaning the grinder Care and cleaningRemoving the coffee brewing unit Cleaning the coffee brewing unitInserting the coffee brewing unit Cleaning the coffee brewing unitCleaning the coffee brewing unit Bean Hopper to PRE-GROUND Running the cleaning programCleaning Required Refill Water ReservoirRunning the cleaning program Running the descaling program Descaling RequiredRefill Water MIN ML Running the descaling program Please Wait Descaling Completed Problem Possible Cause What to do Trouble Shooting GuideTrouble Shooting Guide Coffee receptacle and shaft Inserting the brewing unit Locking lever behind Espresso Short Black RecipesRecipes Page Page Australia 1800 025 New Zealand 0800 786 12/05 0800 786 Consumer Hotline

EM8910 specifications

The Sunbeam EM8910 is a versatile and innovative appliance that redefines the way users approach cooking and meal preparation. Renowned for its user-friendly design and advanced functionalities, this multi-function kitchen machine is ideal for both novice and experienced home cooks.

One of the standout features of the EM8910 is its powerful 1200-watt motor. This robust motor is designed to tackle a variety of tasks, from blending and chopping to kneading dough and whisking. The appliance boasts multiple speed settings, allowing users to customize the power to suit their needs while ensuring optimal results for different types of food and ingredients.

The EM8910 comes equipped with a large capacity bowl, capable of holding up to 4.5 liters. This generous size allows users to prepare large batches of food, making it perfect for family meals or entertaining guests. Additionally, the stainless steel bowl is not only durable but also easy to clean, ensuring that maintaining kitchen hygiene is hassle-free.

Another significant aspect of the Sunbeam EM8910 is its array of attachments that enhance its versatility. Included with the appliance are a whisk, dough hook, and flat beater, allowing users to easily switch tasks without needing multiple machines. Whether whipping cream, kneading dough for bread, or mixing cake batter, the EM8910 has the right tool for the job.

The appliance also features a tilt-back head design, which provides easier access to the mixing bowl and makes switching attachments a breeze. This thoughtful design element enhances user convenience and safety, ensuring that users can operate the machine with ease.

The EM8910 also incorporates advanced safety features, including overload protection and non-slip feet, promoting stability during operation. The appliance is built to last, with a sturdy build quality that can withstand the demands of regular use.

With its sleek and modern aesthetic, the Sunbeam EM8910 is not only functional but also stylish, making it a great addition to any kitchen. The intuitive control interface features clear settings, making it accessible for users of all skill levels.

In summary, the Sunbeam EM8910 is a powerful, multi-functional kitchen appliance that simplifies the cooking process. Its combination of a powerful motor, large capacity bowl, versatile attachments, and safety features make it an essential tool for anyone looking to enhance their culinary experience. Whether baking, mixing, or blending, the EM8910 is designed to deliver consistent performance and delicious results.
Top Page Image Contents