Sunbeam EM8910 manual Care and cleaning, Regular cleaning, Emptying the coffee waste container

Page 33

Care and cleaning

Note: When the espresso machine is turned on it will go through an Auto Clean cycle. This removes any old coffee grinds from the coffee brewing unit.

The coffee making process involves extracting oils out of coffee grinds to make espresso coffee. Deposits of these oils build up over time and affect the taste of the coffee and operation of the espresso machine.

Regular cleaning of the Sunbeam Intuitive Digital guarantees a constant coffee quality and a trouble-free operation.

Regular cleaning

Important: Switch the espresso machine off before cleaning. Let the espresso machine cool down. Do not use scratching, scouring or corrosive agents. Clean the housing inside and outside with a damp cloth only.

Important: Never put the espresso machine or parts of the espresso machine into the dishwasher.

Important: Never pour water into the coffee bean hopper as you will damage the grinding mechanism.

Important: To prevent damage to the espresso machine do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent.

Remove the water reservoir daily and empty any remaining water. Rinse out the water reservoir with fresh water. Use fresh water every day.

Empty the coffee waste container daily, see section “Emptying the coffee waste container”.

Regularly drain the drip tray. This can be done at any time, but must be done when the red drip tray float appears through the opening in the cup resting grid.

Regularly (at least once a week) clean the water reservoir, drip tray, cup resting grid and coffee wasted container with warm soapy water.

Remove the coffee bean hopper from time to time, dispose of the coffee residue and give it a wipe to remove the film of oil from the coffee beans.

The steam nozzle and frothing attachment need to be cleaned after each frothing process. To clean the steam nozzle, simply wipe clean with a damp cloth. When using the frothing attachment, after each use remove it from the steam nozzle and clean thoroughly in warm water to remove milk remains. Additionally, should the air inlet at the base of the steam nozzle become blocked, open it using a pin or a thin piece of wire.

Cleaning the height-adjustable espresso pour spouts

If the height-adjustable espresso pour spouts becomes stiff, remove the coffee waste container, open the service cover and remove it. Slide the height-adjustable espresso pour spouts right down, and off the bottom. To do this, gently raise the inside catch. Use warm water to clean any coffee residues from both parts. Reassemble the two parts. To do this, gently pull up the catch. Check the ease of movement of the height-adjustable espresso pour spouts. Refit the service cover and push the coffee waste container back in place.

Emptying the coffee waste container

At regular intervals, after every 16 coffee brews, the coffee waste container indicator on the control panel signals that the container has to be emptied and cleaned. The display shows <<EMPTY WASTE CONTAINER>>.

When the espresso machine is in daily use, empty the container daily. As a reminder the display shows <<EMPTY WASTE CONTAINER>> every time you switch the espresso machine off.

Note: Always empty the coffee waste container with the espresso machine switched on, otherwise the espresso machine does not register that the container has been emptied.

31

Image 33
Contents Intuitive Digital Page Contents Safety Precautions for Your Sunbeam Espresso Machine Sunbeam’s Safety PrecautionsWhat makes a good coffee? About espresso coffeeFeatures of your Sunbeam Intuitive Digital Coffee grind selector Coffee bean hopperControl panel with LCD Removable drip tray and cup resting gridSteam pre-selection Power Water indicator VolumeTemperature indicator Automatic rinse Or 2 cupOne touch operation Thermoblock Heating SystemBar Pump LCD menu overview Preparing your Sunbeam Intuitive Digital Filling the machine Switching on the machineUsing the Sunbeam Intuitive Digital Switching off the machineRinsing Please Wait Setting and saving the water hardness level Setting the water hardnessDetermining water hardness Hardness degreeFilling the coffee bean hopper Making an espresso with beansMaking an espresso with beans Select espresso pour volume/sizeSelecting the strength/quantity of coffee EXTRA-MILDCancelled Please Wait Setting the number of cups and dispensing coffeeFilling the pre-ground coffee receptacle Making an espresso with pre-ground coffeeMaking an espresso with pre-ground coffee Selecting espresso pour volume/sizeRinse button See . LCD Indicates Rinsing Please Wait Secrets to the perfect cup Steam Ready Open Switch Milk frothingHeating Please Wait LCD Indicates HOT Water Milk frothingImportant cleaning instructions for the steam nozzle Easy steps for frothing milkFrothing with the frothing attachment Hot water function Programming the espresso pour volume Changing and saving the coffee strength/ quantity Programming the espresso pour volumeSetting the fineness of the grind Grind setting selectionCleaning the grinding mechanism Removing foreign matter from the grinding mechanismReplace the grinding ring Grind setting selectionMenu settings Setting languageSetting the coffee temperature Setting the sleep mode Menu settingsResetting the espresso machine to the factory setting Reset Care and cleaning Regular cleaningEmptying the coffee waste container Cleaning the grinder Care and cleaningRemoving the coffee brewing unit Cleaning the coffee brewing unitInserting the coffee brewing unit Cleaning the coffee brewing unitCleaning the coffee brewing unit Cleaning Required Running the cleaning programRefill Water Reservoir Bean Hopper to PRE-GROUNDRunning the cleaning program Running the descaling program Descaling RequiredRefill Water MIN ML Running the descaling program Please Wait Descaling Completed Problem Possible Cause What to do Trouble Shooting GuideTrouble Shooting Guide Coffee receptacle and shaft Inserting the brewing unit Locking lever behind Espresso Short Black RecipesRecipes Page Page Australia 1800 025 New Zealand 0800 786 12/05 0800 786 Consumer Hotline

EM8910 specifications

The Sunbeam EM8910 is a versatile and innovative appliance that redefines the way users approach cooking and meal preparation. Renowned for its user-friendly design and advanced functionalities, this multi-function kitchen machine is ideal for both novice and experienced home cooks.

One of the standout features of the EM8910 is its powerful 1200-watt motor. This robust motor is designed to tackle a variety of tasks, from blending and chopping to kneading dough and whisking. The appliance boasts multiple speed settings, allowing users to customize the power to suit their needs while ensuring optimal results for different types of food and ingredients.

The EM8910 comes equipped with a large capacity bowl, capable of holding up to 4.5 liters. This generous size allows users to prepare large batches of food, making it perfect for family meals or entertaining guests. Additionally, the stainless steel bowl is not only durable but also easy to clean, ensuring that maintaining kitchen hygiene is hassle-free.

Another significant aspect of the Sunbeam EM8910 is its array of attachments that enhance its versatility. Included with the appliance are a whisk, dough hook, and flat beater, allowing users to easily switch tasks without needing multiple machines. Whether whipping cream, kneading dough for bread, or mixing cake batter, the EM8910 has the right tool for the job.

The appliance also features a tilt-back head design, which provides easier access to the mixing bowl and makes switching attachments a breeze. This thoughtful design element enhances user convenience and safety, ensuring that users can operate the machine with ease.

The EM8910 also incorporates advanced safety features, including overload protection and non-slip feet, promoting stability during operation. The appliance is built to last, with a sturdy build quality that can withstand the demands of regular use.

With its sleek and modern aesthetic, the Sunbeam EM8910 is not only functional but also stylish, making it a great addition to any kitchen. The intuitive control interface features clear settings, making it accessible for users of all skill levels.

In summary, the Sunbeam EM8910 is a powerful, multi-functional kitchen appliance that simplifies the cooking process. Its combination of a powerful motor, large capacity bowl, versatile attachments, and safety features make it an essential tool for anyone looking to enhance their culinary experience. Whether baking, mixing, or blending, the EM8910 is designed to deliver consistent performance and delicious results.