Sunbeam EM8900 Care and cleaning, Drip tray and grill, Group head, filter handle & filter baskets

Page 28

Care and cleaning

The coffee making process involves extracting oils out of coffee grinds to make espresso coffee. Deposits of these oils build up over time and affect the taste of the coffee and operation of the espresso machine.

Regular cleaning to remove these oils is essential and will maintain the quality of the coffee the espresso machine produces and result in less maintenance being required. This is easy to do by following a few quick and easy cleaning steps after each coffee making session;

Cycle water through the group head,

Purge steam through the steam wand,

Wipe the steam wand clean with a damp cloth immediately after use,

Remove the filter basket from the filter handle and clean away any old coffee oils, and

Empty the drip tray and rinse.

Important: Never wash any of the espresso machine parts or accessories in the dishwasher.

Drip tray and grill

Remove the grill and drip tray at regular intervals to empty (46) (47). Clean with water and a little non-abrasive washing up liquid, rinse and dry.

Group head, filter handle & filter baskets

The filter baskets and filter handle should be rinsed with warm water after each use and then dried thoroughly.

To clean the group head of any old coffee grinds cycle water through and wipe the group head and around the inside rim with a damp cloth.

Should the holes in the filter baskets become clogged with coffee granules use a fine bristled brush to remove them.

Group head rubber seal

The group head seal is located on the underside of the group head and creates a seal against the filter handle during the espresso pour.

Note: During long periods of non-use we recommend that the filter handle not be left attached to the group head as this will reduce the life of the seal.

Over time the seal will loose its elasticity and require replacement, depending on use usually every 12 months. Signs that the seal is deteriorating are when the filter handle cannot create the necessary seal and steam escapes from around the group head during the espresso pour.

Note: Contact Sunbeam on 1800 025 059 should you think that the group head seal needs replacing.

Cup warming plate, hot water wand and exterior

Wipe over the unit with a damp cloth and wipe dry. Do not use abrasives or metal scourers as these will scratch the exterior surface.

Steam wand

Keeping the steam arm clean is essential to ensure maximum efficiency of the steam function. A build up of caramelised/dried milk on the steam wand will impair the steaming and texturing ability of the espresso machine.

Important: Wipe the steam wand clean with a damp cloth immediately after each use and purge a small amount of steam.

Should the milk dry/caramelise on the steam wand, simply wrap the wand with a clean damp cloth, turn the steam wand over the drip tray and turn the steam on for approximately 10 seconds (48). With the cloth still on the steam wand leave to soak

27

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page Contents Important instructions retain for future useSunbeam’s Safety Precautions Safety Precautions for Your Sunbeam Espresso MachineAbout espresso coffee Height adjustable rubber feet Warming plateVariable steam control dial Steam wand Removable drip tray and grillLow water warning indicator Accessories Programmable control panelHot water control dial Hot water wand Litre water reservoirTwin Pump and Twin Thermoblock Tptt System Tptt System Simultaneous UseCommercial Size Group Head & Filter Handle Control PanelPre-Infusion Anti Calc FilterUsing the control panel PowerManual Single EspressoDouble Espresso Using the control panelProgram Using the control panel Reference guide to using your espresso machine Preparing the espresso machineReference guide to using your espresso machine Making the espressoProgramming Texturing milk Press the double espresso button to start and end the pourHot water Cleaning Remove filter handle from the group head Resetting the Factory Settings Programming your espresso machineProgramming Single Espresso Programming Double EspressoProgramming your espresso machine Preparing your espresso machine before use Guide to the perfect espresso Preheat GlassesPreheat Filter Handle and Filter Basket Dosing and TampingGuide to the perfect espresso Sleep ModeCaring for your Espresso Machine Guide to milk texturing Important Do not boil the milkUsing the hot water dispenser Espresso recipes Espresso Short BlackEspresso recipes Caffe LatteCare and cleaning Drip tray and grillGroup head, filter handle & filter baskets Group head rubber sealCleaning the group head Care and cleaningPreparing for the cleaning cycle Starting the cleaning cycleCleaning the group head Descaling Descaling solutionDescaling the espresso machine Descaling Australia 1800 025 New Zealand 0800 786 Consumer Hotline

EM8900 specifications

The Sunbeam EM8900 is a versatile and efficient espresso machine that has carved a niche in the home coffee brewing market. This model is designed for coffee enthusiasts seeking to replicate barista-quality espresso at home, bringing a blend of technology, ease of use, and robust performance.

One of the notable features of the Sunbeam EM8900 is its powerful 15-bar pump system, which is essential for brewing authentic espresso. This pressure ensures that water extracts the rich flavors and aromas from the coffee grounds, resulting in a full-bodied beverage. Coupled with a stainless-steel boiler, the machine heats water quickly and efficiently, reducing waiting time between brewing sessions.

The EM8900 is equipped with a built-in steam wand, allowing users to froth milk for lattes and cappuccinos. The steam wand is designed for easy maneuverability, making it simple to create creamy microfoam and textured milk. The machine also comes with a dual-action filter holder, including a single and double filter basket, which provides flexibility for different brewing preferences. This feature enables users to experiment with their favorite coffee beans and discover their perfect blend.

In terms of user experience, the Sunbeam EM8900 boasts a straightforward interface with easily accessible controls. The machine features indicators for water levels and temperature, ensuring users can monitor their brewing process effectively. The 1.5-liter removable water tank is another practical attribute, offering sufficient capacity for multiple servings without constant refilling.

Cleaning and maintenance are also important considerations. The EM8900 has a drip tray and a removable brew head, making it easy to clean after each use. Regular upkeep of the machine is straightforward, ensuring longevity and consistent performance.

Moreover, the design of the Sunbeam EM8900 combines aesthetics with functionality. The sleek stainless-steel finish not only enhances its appearance but also guarantees durability. Its compact size allows it to fit seamlessly in any kitchen without taking up too much counter space, appealing to both casual coffee drinkers and serious aficionados.

In summary, the Sunbeam EM8900 stands out in the espresso machine market due to its combination of advanced features, user-friendly design, and high-quality output. Whether you’re making a quick espresso shot or indulging in a frothy cappuccino, this machine provides the tools needed to make your coffee experience exceptional. Its balance of technology and simplicity makes the Sunbeam EM8900 a worthy addition to any coffee lover’s kitchen.
Top Page Image Contents