Sunbeam EM8900 Guide to the perfect espresso, Preheat Glasses, Dosing and Tamping, Espresso Pour

Page 22

Guide to the perfect espresso

Preheat Glasses

1.Preheat the glasses/cups by filling them with hot water as this will assist to preserve the crema of the espresso. Set the glasses/ cups aside.

Preheat Filter Handle and Filter Basket

2.Select the appropriate filter basket and place it into filter handle (14).

Tip: Use the one cup filter basket for a single serve of espresso and the two cup filter basket for a double serve of espresso.

3.Take the filter handle, hold it under the group head and purge water. With the filter basket positioned under the group head press the ‘MANUAL’ button to start the water flow and press it again to stop (15).

4.Dry the filter basket.

Dosing and Tamping

5.Using the measuring spoon supplied, place finely ground coffee into the filter basket (16).

6.Rest the filter handle with the filter basket in position onto the benchtop. Take the coffee tamp, apply firm level packing pressure (17), twisting 90 degrees to polish the grounds. This seals the surface of the coffee cake.

7.Brush any excess coffee grounds from around the edge of the filter basket (18).

Important: Be sure not to over dose the filter basket with coffee. As a guide the top of the stainless steel section on the base of the coffee tamp needs to be level with the top rim of the filter basket.

Tip: The coffee dosage and the degree of tamping should remain the same every time you make a coffee the only thing that should vary is the coarseness of the coffee grounds

and this will vary depending on the bean. For example to achieve a slower espresso pour rate use a finer grind and a coarser grind for a faster espresso pour rate.

Tip: Ensure the coffee tamp is dry because if it is wet the coffee grinds will stick to it.

The Espresso Pour

8.Lock the filter handle onto the group head (19)(20).

9.Empty the glasses/cups and place below the pouring spouts (21).

Note: Check to see that the espresso machine is ready for use, remember that if the ‘POWER’ light is flashing green, this indicates that the espresso machine is on and is heating up.

10.Press the required volume button; ‘MANUAL’ for a continuous pour (22), the single espresso for a 35ml pour

(23)or the double espresso for a 70ml pour (24).

Note: When using the ‘MANUAL’ operation the coffee maker must press the button once to start the pour and again to stop the pour. However with the single and double espresso operations the coffee maker need only to press these buttons once to start the espresso pour and the program will automatically stop the pour at the pre- programmed level.

Pre-Infusion

11.Once an espresso operation has been activated, before the espresso pour starts the pre-infusion feature will release three short bursts of gradual water pressure onto the coffee cake. After this, the full water pressure is applied to the coffee cake and the espresso will pour freely.

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Contents Important instructions retain for future useSunbeam’s Safety Precautions Safety Precautions for Your Sunbeam Espresso MachineAbout espresso coffee Variable steam control dial Steam wand Height adjustable rubber feetWarming plate Removable drip tray and grillHot water control dial Hot water wand Low water warning indicator AccessoriesProgrammable control panel Litre water reservoirTwin Pump and Twin Thermoblock Tptt System Tptt System Simultaneous UsePre-Infusion Commercial Size Group Head & Filter HandleControl Panel Anti Calc FilterManual Using the control panelPower Single EspressoDouble Espresso Using the control panelProgram Using the control panel Reference guide to using your espresso machine Preparing the espresso machineReference guide to using your espresso machine Making the espressoProgramming Texturing milk Press the double espresso button to start and end the pourHot water Cleaning Remove filter handle from the group head Programming Single Espresso Resetting the Factory SettingsProgramming your espresso machine Programming Double EspressoProgramming your espresso machine Preparing your espresso machine before use Preheat Filter Handle and Filter Basket Guide to the perfect espressoPreheat Glasses Dosing and TampingGuide to the perfect espresso Sleep ModeCaring for your Espresso Machine Guide to milk texturing Important Do not boil the milkUsing the hot water dispenser Espresso recipes Espresso Short BlackEspresso recipes Caffe LatteGroup head, filter handle & filter baskets Care and cleaningDrip tray and grill Group head rubber sealPreparing for the cleaning cycle Cleaning the group headCare and cleaning Starting the cleaning cycleCleaning the group head Descaling Descaling solutionDescaling the espresso machine Descaling Australia 1800 025 New Zealand 0800 786 Consumer Hotline

EM8900 specifications

The Sunbeam EM8900 is a versatile and efficient espresso machine that has carved a niche in the home coffee brewing market. This model is designed for coffee enthusiasts seeking to replicate barista-quality espresso at home, bringing a blend of technology, ease of use, and robust performance.

One of the notable features of the Sunbeam EM8900 is its powerful 15-bar pump system, which is essential for brewing authentic espresso. This pressure ensures that water extracts the rich flavors and aromas from the coffee grounds, resulting in a full-bodied beverage. Coupled with a stainless-steel boiler, the machine heats water quickly and efficiently, reducing waiting time between brewing sessions.

The EM8900 is equipped with a built-in steam wand, allowing users to froth milk for lattes and cappuccinos. The steam wand is designed for easy maneuverability, making it simple to create creamy microfoam and textured milk. The machine also comes with a dual-action filter holder, including a single and double filter basket, which provides flexibility for different brewing preferences. This feature enables users to experiment with their favorite coffee beans and discover their perfect blend.

In terms of user experience, the Sunbeam EM8900 boasts a straightforward interface with easily accessible controls. The machine features indicators for water levels and temperature, ensuring users can monitor their brewing process effectively. The 1.5-liter removable water tank is another practical attribute, offering sufficient capacity for multiple servings without constant refilling.

Cleaning and maintenance are also important considerations. The EM8900 has a drip tray and a removable brew head, making it easy to clean after each use. Regular upkeep of the machine is straightforward, ensuring longevity and consistent performance.

Moreover, the design of the Sunbeam EM8900 combines aesthetics with functionality. The sleek stainless-steel finish not only enhances its appearance but also guarantees durability. Its compact size allows it to fit seamlessly in any kitchen without taking up too much counter space, appealing to both casual coffee drinkers and serious aficionados.

In summary, the Sunbeam EM8900 stands out in the espresso machine market due to its combination of advanced features, user-friendly design, and high-quality output. Whether you’re making a quick espresso shot or indulging in a frothy cappuccino, this machine provides the tools needed to make your coffee experience exceptional. Its balance of technology and simplicity makes the Sunbeam EM8900 a worthy addition to any coffee lover’s kitchen.
Top Page Image Contents