Sunbeam BT6700 manual Check that the food is centered on the rotisserie rod

Using your Convection Bake & Grill (continued)

Figure 3 Figure 4

4.Check that the food is centered on the rotisserie rod.

5.Place the wire rack, in the sunken position, into the lower rack support guide.

6.Place the enamel baking pan, without drip tray, onto the wire rack to catch food drippings.

7.Turn the oven setting to ‘Rotisserie’.

8.Preheat the oven to the maximum 240ºC for 5 -10 minutes or as per recipe instructions.

9.To turn the rotisserie on, turn the timer control to the desired time. Alternatively, for continuous operation, turn the timer control to the ON position.

Note: Turning the rotisserie function on prior to inserting the rod will allow for easier insertion of the rod into the drive socket.

10.Use the rotisserie handle to lift the rotisserie rod, ensuring to place the hooks of the rotisserie handle under the grooves on either side if the rotisserie rod. See Figure 5.

Figure 5

11.Insert the pointed end of the rotisserie rod into the drive socket, located on right-hand side of the oven wall ➀, then position the squared off end of the rotisserie rod in the rotisserie rod support located on the left-hand side of the oven wall ➁. See Figure 6.

➁ ➀

Figure 6

9