ENGLISH
Getting Started
NOTE:
Getting Started
Remote control unit
•When the VOLUME control knob is set just beyond the “12 o’clock” position (over halfway), the adjustments that can be made with the BASS and TREBLE controls is decreased.
•When the VOLUME control knob is set to maximum or turned fully clockwise, the base and treble can no longer be adjusted.
•Functions r, t, y and !1are only available when the SOURCE DIRECT switch is set to “£OFF”.
Amplifier operating
buttons
POWER button
This operates the main unit’s power.
|
| POWER |
| CD |
|
1 | 2 | 3 |
DENON product
operating buttons
CD player block
0~9, +10 : Number buttons
REPEAT : Repeat playback RANDOM : Random playback
Rear panel
Input source selector buttons
These switch the input source.
4 | 5 | 6 |
7 | 8 | 9 |
8, 9 : Search
1: Play
3 | : Pause |
2 | : Stop |
!4
!5 !6 !7
!4SIGNAL GND (ground) terminal
Connect the ground wire from your turntable here.
NOTE:
• This terminal is not a safety ground.
!5Input terminals (INPUTS)
Connect your source equipment here.
!6Recording input/output terminals
Connect your recording equipment here.
!7Speaker system terminals
(SPEAKER SYSTEMS)
Connect your speakers here.
!8 !9
•
MUTING button
Press this to mute the sound. The power indicator on the main unit blinks red.
Press again to produce sound.
Volume adjust buttons
These adjust the volume.
0 | +10 | REPEAT |
RANDOM |
|
|
PHONO | ||
CD | TUNER | DVD / AUX |
|
| MUTING |
TUNER |
| DISC |
PRESET |
| SKIP |
A / B | REC |
|
| DECK |
|
CD player block
DISC SKIP
This button selects the disc, when using a DENON
TUNER block
TUNER PRESET •, ª
These switch the preset channel.
Tape deck block
6: Rewind
7 :
0 : Reverse play
1 : Forward play
A/B : Switch between decks A and B for double decks
REC : Record 3 : Pause 2 : Stop
!8AC OUTLET
Use this as the power outlet for other audio devices. Check equipment power requirement ratings before use (see the ratings as marked on the rear panel). If in doubt consult with your dealer or DENON distributor.
!9Power supply cord
3
•The included remote control unit can be used to operate DENON CD players, tape decks and tuners.
•When using it, also refer to the operating instructions of the other devices.
•Some products may not be operable.
ENGLISH