840127800 ENv01.qxd 6/29/04 9:31 AM Page 7
How to Assemble Your Mixer
To Attach the Bowl
1. Make sure Setting Control is set to O and Mixer is unplugged.
2. Press up on Mixer Release Button and tilt Mixer Head up.
3. Place Bowl in bowl lock and turn clockwise until Bowl locks into place.
4. Press up on Mixer Release Button and tilt Mixer Head down.
5. Plug Mixer into electrical outlet.
To Remove:
1. Make sure Setting Control is set to O and Mixer is unplugged.
2. Press up on Mixer Release Button and tilt Mixer Head up.
3. Turn Bowl counterclockwise to unlock.
To Attach the Beater, Wire Whisk, or Dough Hook
wWARNING
Injury Hazard
Unplug mixer before inserting or removing beaters.
Unplug mixer before cleaning. Failure to do so can result in broken bones or cuts.
1. Make sure Setting Control is set to O and Mixer is unplugged.
2. Press up on the Mixer Release Button and tilt the Mixer Head up.
3. Insert Attachment onto Beater Shaft and press upward as far as possible.
4. Turn the Attachment to the right, hooking beater over pin on shaft.
5. Press up on Mixer Release Button and tilt the Mixer Head down.
6. Plug Mixer into electrical outlet.
7