Villaware NDVLFP1000 Before Using How To, Control Knob, Assemble The Bowl, Lock the Cover

Before Using: How To:

When unpacking the product and removing packing material, and any promotional labels or stickers from your food processor. Be sure all parts (listed under Features) of your new appliance have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date.

Handle the chopping blade, slice/shred discs and french fry cutter carefully: they are very sharp. Wash all parts except the Base in hot, soapy water. Rinse them dry. These parts can also be placed in the dishwasher. Be sure

to read the Care & Cleaning Section of this manual to learn the correct methods for taking the unit apart and cleaning.

Control Knob

1Pulse – The control knob must be turned to the left and held for unit to operate. When released, unit will stop. Use PULSE for short processing tasks, such as chopping nuts, raw meats, or vegetables. This lets you check processed results and control the consistency.

2On – When the control knob is turned to the right to the ON position, unit will run continuously until the control knob is turned to OFF position.

3Off – Processor should always be left in OFF position when not in use.

OFF

PULSE ON

NOTE: Do not attempt to chop ice in this food processor; it will damage the bowl and dull the Chopping Blade. This unit will not whip cream, beat egg whites, grind coffee beans, spices or other items with high oil content, or slice or shred hard-cooked eggs, marshmallows, or soft cheeses.

Important: For your protection, this unit has an interlock system. The processor will not operate unless the bowl is properly locked onto the base and cover is properly locked onto the bowl. Do not attempt to operate the unit without the bowl lid, bowl and food chute lid correctly in place. Be sure base is on a flat, dry and clean surface before you begin processing.

NOTE: Before you begin, PLEASE BE SURE THAT THE ELECTRIC CORD IS UNPLUGGED.

Assemble The Bowl

Align the base and bowl (Figure 1). Align the bowl arrow with the UNLOCK mark on the base. Turn the bowl counter-clockwise until it clicks onto the base. The bowl handle should now align with the Control Button the base. (Figure 1)

NOTE: There is only one position for the bowl to lock onto the base. The unit will not operate if the bowl does not lock onto the base.

Figure 1 Figure 2

OFF

PULSE ON

Lock the Cover

Place the cover onto the bowl. Align the arrow mark on the cover and the arrow mark on the bowl. Twist the cover counter-clockwise towards the LOCK mark until it clicks onto the bowl. The LOCK mark on the cover should now align with the LOCK mark on the bowl. (Figure 2)

NOTE: When the cover is locked into position, the safety mechanism on the cover and bowl will align. The unit will not operate if the cover is not locked onto the bowl.

NOTE: BOWL MUST BE LOCKED INTO BASE BEFORE COVER CAN BE LOCKED INTO POSITION.

Lock the Food Chute Lid

1The Food Chute lid hinges onto the back of Food Chute.

2Push down the Large Food Pusher into the Food Chute.

3Push down on the Large Food Pusher to latch the Food Chute lid onto the Lid.

NOTE: Unit will not operate if the Food Chute lid does not latch onto the Lid.

4 villaware.com villaware.com 5