Safety Alert Symbols
The following safety alert symbols are used throughout this manual to alert you to the safety hazards described below.
Electrical Shock Hazard
Disconnect power before cleaning blender base.
Failure to follow these instructions can result in death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet. Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Cut Hazard
Always place lid on container when blending.
Do not put hands, spoons, or other utensils in container when blending.
Failure to follow these instructions can result in broken bones, cuts, or other injuries.
Burn Hazard
Always use caution when blending hot contents.
Failure to follow these instructions can result in burns.
Sanitizing
Sanitize using 1 tablespoon (15 ml) of household bleach per 1 gallon (3.8 liter) of clean, cool water (60°F/16°C), mixed according to the instructions on the bleach.
1.Fill container with sanitizing solution, replace lid and filler cap and run on LOW speed for 2 minutes. Empty container.
2.Wipe exterior with soft cloth dampened with sanitizing solution.
3.Immerse lid and filler cap in sanitizing solution for 2 minutes.
4.Place empty container on base and run on HIGH speed for 2 seconds to remove any moisture from the cutter assembly.
5.When ready to use, rinse with clean water.
Technical Service
For assistance or replacement parts, call our Technical Service number:
8 a.m. – 5:00 p.m. EST Monday – Friday www.commercial.hamiltonbeach.com
Replacement Parts
The following components are subject to wear and should be replaced at least yearly. We recommend keeping a replacement container and cutter on hand.
Part Description | Part Number | |
48 oz. polycarbonate container |
| |
Cutter assembly | 98450 |
|
3