Bose Companion 3 Series II manual Lq£

Important notes on system setup and use

To Speakers jacks

Connect only Companion® 3 speakers to the jacks labeled To Speakers on the back of the

Acoustimass® module.

I

I L@~

		•	R@
		I
			To Speakers
	o		WARNING! Connect only to
Back of the			satellite speakers provided
			-@@
Acoustimass			From Computer
module			lOG>
			To Control Pod
			Power
			~nI( j) I
			CJAClnput

A CAUTION: Connecting any other electronic device to these jacks may damage your equipment.

Control pod cable connector

1.Be sure the cable connector is right side up, with the arrow showing, before inserting it.

2.Insert it into the jack labeled To Control Pod on the back of the Acoustimass module.

I

L@~

R@

		To Speakers
		WARNING! Connect only 10
	o	satellite speakers provided
Back of the		-@@
Acoustimass		From Computer
	.....	lQ£-
module				Control pod
	IIIIIIII"		To Control Pod
		To Control Pod		cable
		Power		connector
		~nI( ! ) I		<§>
		CJ
		AClnput

A

System activation

CAUTION: Improperly inserting the control pod cable connector may damage the product.

To begin using the system:

1.Turn on your computer or other sound source.

2.Turn on the Companion 3 speaker system power.

Use the switch labeled Power on the back of the Acoustimass module.

3.Press the top of the control pod to unmute the system (if the indicator light is yellow). The indicator light turns green when the system activates.

4.Adjust the volume by rotating the outer band of the control pod.

Press to activate Watch for green light

Rotate to adjust volume

--ElO.5'~

Better sound through research®

AM273708 Rev. 01 Z2T

1I111I1111111111111111111111

273708