English
Español Français
Figure 5
Speaker connection jacks
SETUP AND CONNECTIONS
Connecting the speakers to the module
The speakers, control pod, and computer all connect directly to the Acoustimass® module.
1.Insert the connector on each speaker cable into the corresponding L or R jack labeled To Speakers on the rear of the Acoustimass module (Figure 5).
CAUTION: Connect only Companion® 3 speakers to these jacks. Connecting any other electronic device to these jacks may damage your speaker system.
Figure 6
Proper control pod cable connection
Figure 7
2.Insert the control pod cable into the jack labeled To Control Pod on the rear of the module. Be sure the cable connector is right side up, with the arrow showing (Figure 6).
Arrow indicator
3.Insert the connector on one end of the supplied audio input cable into the jack labeled From Computer on the rear of the module. Connect the other end to the audio output jack on your computer (Figure 7).
Labels on the module for ease in making connections
Right
speaker
AC outlet
Power cord
Acoustimass Module | Left |
speaker | |
| To |
| Speakers |
| From |
| Computer |
| Computer |
| To |
| Control Pod |
| Control Pod |
Note: '
available from retail electronics stores"
9