Troubleshooting Suggestions

M506 p/n 304964 OpManual WVOC-4 Series Ventless Hotplate Cooktop Convection Oven

A.	NO PART OF THE APPLIANCE WILL HEAT	CAUTION:
1.	Verify that appropriate cooking controls are ON.	ELECTRIC
2.	Check electrical supply. Make sure service breaker is ON.	SHOCK HAZARD
3.	Make sure all filters are properly installed, and that no filter warning
	lights are lit.	Removal of any cabinet panel
4.	Possible improper service wiring: Have a licensed electrician verify	will result in exposed
	that all three legs of the 3ø service are properly connected	electrical circuits. Any
	(i.e. Leg 1 to L1, Leg 2 to L2, Leg 3 to L3), and that all three legs are	procedure requiring the
	of the proper voltage and phase.	removal of any cabinet panel
5.	Ansul® Fire Suppression System not charged.	must be performed by a

qualified technician only.

B. HOTPLATE WILL NOT HEAT

1.Verify that associated temperature control is set to the desired temperature.

2.Possible internal component damage: Have unit serviced by an Authorized Wells Service Agency.

C.CONVECTION OVEN WILL NOT HEAT See Error Codes diagram at right

1.Verify that the oven switch is ON and that the temperature control is set to the desired temperature.

2.Verify that the door is closed.

3.Hi-Limit control may have tripped: Allow unit to cool; Hi-Limit will reset automatically.

4.Blown fuse(s) (item 40): Correct cause of over-current and replace fuses with fuses having the same configuration and ratings.

5.Possible internal component damage: Have unit serviced by an Authorized Wells Service Agency.

D. CONVECTION OVEN FAN WILL NOT RUN

1.Verify that the oven switch is set to ON or FAN.

2.Verify that the fan switch is set to either HIGH or LOW.

3.Hi-Limit control may have tripped: Allow unit to cool; Hi-Limit will reset automatically.

4.Blown fuse(s): Correct cause of over-current and replace fuses with fuses having the same configuration and ratings.

5.Possible internal component damage: Have unit serviced by an Authorized Wells Service Agency.

NOTE: Other than the ventilator filters, there are no user serviceable components in the appliance. In all cases of damage or component malfunction, contact your Authorized Wells Service Agency for repairs.

WVOC-4HS specifications

The Wells WVOC-4HS is a cutting-edge vaporizer designed to meet the needs of various industrial applications, particularly in the pharmaceutical and chemical sectors. Known for its exceptional performance and reliability, the WVOC-4HS stands out with its innovative features and advanced technologies.

One of the main features of the Wells WVOC-4HS is its high-efficiency heating system. Utilizing advanced thermal conduction methods, this vaporizer ensures rapid and uniform heating of the material, minimizing any potential degradation while maximizing output. Its robust design supports a variety of materials, providing versatility in application.

The WVOC-4HS is equipped with a user-friendly digital control interface that allows for precise temperature regulation and monitoring. This feature is crucial in industries where specific temperature thresholds must be maintained for optimal safety and efficacy. The control system can be integrated with existing automated systems, enabling seamless operation and consistent performance.

Another important characteristic of the Wells WVOC-4HS is its safety protocols. The design incorporates multiple safety features, including over-temperature protection and pressure relief valves. These systems are designed to prevent accidents and ensure a safe operating environment for all personnel.

The vaporizer’s construction is also noteworthy, as it is made from high-grade, corrosion-resistant materials. This not only increases the longevity of the device but also ensures that it can withstand various chemicals, making it a dependable choice for rigorous industrial use. This durable build quality is essential for maintaining performance in demanding environments.

Additionally, the Wells WVOC-4HS boasts a compact design that allows for easy installation and integration into existing setups. Its lightweight architecture aids in reducing space requirements without compromising on performance.

In summary, the Wells WVOC-4HS is a reliable and efficient vaporizer that combines high-efficiency heating, advanced digital controls, robust safety features, and durable construction. Its versatility makes it an ideal choice for industries that require precise vaporization processes, ensuring optimal performance in every application. Whether used in pharmaceutical production or chemical processing, the WVOC-4HS exemplifies technological advancement and reliability in vaporization.