Wells WV-4HSRW operation manual Hotplate Cooktop Operation, General Operational Notes

Page 16

OPERATION (continued)

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

Indicator

Light

Temperature

Control

(Infinite

Switch)

Fig. 11 Hotplate Temperature Control

IMPORTANT:

The dial markings are an INDICATION of temperature only. The temperature of the food product depends on many factors, including the size, shape and material of the food container, and the quantity and consistency of the food

product.

HOTPLATE COOKTOP OPERATION

GENERAL OPERATIONAL NOTES

Carefully read the description of the hotplate operation on the specification sheet.

DO NOT attempt to perform any maintenance or service unless the hotplate is disconnected from electrical power.

DO turn the circuit breaker for the hotplate off before cleaning, servicing or performing any maintenance.

DO NOT use sharp objects or metal implements to clean the heating elements.

DO use a plastic spatula or plastic scouring pad to remove burned-on food product.

OPERATION

Each heating element is controlled by an infinite switch temperature control:

OFF removes power from the element LOW thru 8 are temperature settings Higher numbers indicate higher temperatures

There is a continuous range of settings between LOW and HI HI is a continuous ON setting

The indicator light will glow any time the temperature control is on.

On ceramic cooktops, the HOT SURFACE indicator will glow any time the control is on, or the surface is above 150ºF.

Cooking Recommendations:

Save energy by turning the temperature control off any time the hotplate is not in use. The coil-type and ceramic heating elements will provide full heat within 30 seconds, while solid plate heating elements will reach full heat within 2 minutes, making it unnecessary to leave the unit on during intermittent use.

Each heating element can hold up to a 16 quart pot or pan. For efficient heating of food product, pots and pans should be no more than 10” in diameter.

Maximize the efficiency of solid elements and ceramic cooktops by using flat-bottom pots and pans.

Stir thick liquids frequently to maintain a consistent temperature.

14

Image 16
Contents 504 Important do not Discard this ManualLimited Warranty Statement Specifications Table of ContentsIntroduction Features & Operating Controls Ventilator Section Operating Features & ControlsFeatures & Operating Controls Ventilator SectionDescription Comment Do not BlockFeatures & Operating Controls Cooktop Section Controls Ventilator Section ControlsOptional Warmer Section Controls Precautions and General Information Electric Shock hazardPrecautions and General Information Agency Listing InformationOperational Notes STDSetup InstallationUnpacking & Inspection Installation Service Technician Installation NotesElectrical Installation This is Responsibility InstallerFire Hazard Fire Suppression System InstallationAuthority Having Jurisdiction Filters Installation Filter InstallationGrease Trough and Grease CUP Installation Hotplate Drip PAN Installation Spiral Heating Elements onlyRoll Warmer Installation Do not Operate Unless Grease CUP is InstalledVentilator Operation OperationPRE-FILTER Element Operation Hotplate Cooktop OperationGeneral Operational Notes OperationDrawer Warmer Operation Heating OptionsCleaning Instructions CleaningPreparation ToolsCleaning Instructions Frequency Monthly Maintenance Schedules Fire HazardPage Page Ansul Health Hazards Troubleshooting Suggestions Symptom Possible Cause Suggested ActionParts & Service Description Service

WV-4HSRW specifications

The Wells WV-4HSRW is a robust and versatile water well drilling rig designed for both the professional driller and the demanding environmental conditions often encountered in well drilling projects. This machine is particularly celebrated for its efficiency, ease of use, and the advanced technologies integrated into its design.

One of the standout features of the WV-4HSRW is its powerful hydraulic system. The rig utilizes a high-pressure hydraulic pump that delivers optimal performance, allowing for effective drilling in various soil conditions. The rig's hydraulic capabilities enable efficient rotary drilling and can accommodate a wide variety of drill bits, making it adaptable to different geological formations.

The WV-4HSRW is equipped with a 4-wheel drive system, which is crucial for maneuverability in rugged and uneven terrains. This feature ensures that the rig remains stable and can move seamlessly from one site to another, even in challenging conditions. Additionally, the rig's compact design enhances its ability to navigate tight spaces, which is often a necessity for residential and urban drilling projects.

Safety and operator comfort are paramount in the design of the Wells WV-4HSRW. The rig features an ergonomic cab that provides excellent visibility and protection for the operator. Moreover, the controls are intuitively laid out, which simplifies operation for both experienced drillers and those new to the field. The inclusion of safety features, such as emergency stop systems and reinforced structures, further enhances the safety profile of the rig.

In terms of power, the WV-4HSRW is often powered by efficient diesel engines that provide the necessary energy while remaining fuel-efficient. This not only reduces operational costs but also minimizes the environmental footprint, aligning with modern sustainability goals. The machine’s design allows for easy maintenance access, ensuring that routine checks and repairs can be carried out with minimal downtime.

Overall, the Wells WV-4HSRW represents a significant advancement in drilling technology, combining robust construction with innovative hydraulic systems, user-friendly controls, and enhanced safety features. Whether for water well drilling, geothermal projects, or environmental investigations, this rig is engineered to deliver reliability and effectiveness in every project it undertakes. Its blend of performance and versatility makes it an invaluable asset to any drilling operation.