Precautions and General Information

PRECAUTIONS AND GENERAL INFORMATION

WARNING:

Electric Shock hazard

All servicing requiring access to non-insulated electrical components must be performed by a factory authorized techni- cian.

DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock.

CAUTION:

Risk of

Damage

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

NOTE: Fire suppression system and all associated components must only be serviced by an authorized Ansul® Distributor. All setup, charging, repair and/or adjustment of the fire suppression system must be performed by an Authorized Ansul® Distributor ONLY.

IMPORTANT: If a remote pull station is installed, both rear casters (9) must be replaced with legs to deter moving the unit. MOVING AN APPLIANCE WITH A REMOTE PULL STATION WILL DISCHARGE THE FIRE SUPPRESSION SYSTEM.

This Ventless Cooking System™ is designed to help reduce odor emissions, but will not completely eliminate cooking odors. Air exchange at the installation site must comply with the requirements of the local jurisdictional authority. To ensure that odors do not build-up, recommended minimum air exchange is 300 - 400 cfm of outside air into and out of the area where the unit is used. Recommend use of wall fan (GRAINGER # 4C707) and wall switch (Grainger #4C254), to be supplied by user.

This appliance is intended for use in commercial establishments only.

This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

Do not splash or pour water on, in or over any exposed element, control, control panel or wiring.

DO NOT submerge pre-filter or filter pack in water.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

WV-4HSRW specifications

The Wells WV-4HSRW is a robust and versatile water well drilling rig designed for both the professional driller and the demanding environmental conditions often encountered in well drilling projects. This machine is particularly celebrated for its efficiency, ease of use, and the advanced technologies integrated into its design.

One of the standout features of the WV-4HSRW is its powerful hydraulic system. The rig utilizes a high-pressure hydraulic pump that delivers optimal performance, allowing for effective drilling in various soil conditions. The rig's hydraulic capabilities enable efficient rotary drilling and can accommodate a wide variety of drill bits, making it adaptable to different geological formations.

The WV-4HSRW is equipped with a 4-wheel drive system, which is crucial for maneuverability in rugged and uneven terrains. This feature ensures that the rig remains stable and can move seamlessly from one site to another, even in challenging conditions. Additionally, the rig's compact design enhances its ability to navigate tight spaces, which is often a necessity for residential and urban drilling projects.

Safety and operator comfort are paramount in the design of the Wells WV-4HSRW. The rig features an ergonomic cab that provides excellent visibility and protection for the operator. Moreover, the controls are intuitively laid out, which simplifies operation for both experienced drillers and those new to the field. The inclusion of safety features, such as emergency stop systems and reinforced structures, further enhances the safety profile of the rig.

In terms of power, the WV-4HSRW is often powered by efficient diesel engines that provide the necessary energy while remaining fuel-efficient. This not only reduces operational costs but also minimizes the environmental footprint, aligning with modern sustainability goals. The machine’s design allows for easy maintenance access, ensuring that routine checks and repairs can be carried out with minimal downtime.

Overall, the Wells WV-4HSRW represents a significant advancement in drilling technology, combining robust construction with innovative hydraulic systems, user-friendly controls, and enhanced safety features. Whether for water well drilling, geothermal projects, or environmental investigations, this rig is engineered to deliver reliability and effectiveness in every project it undertakes. Its blend of performance and versatility makes it an invaluable asset to any drilling operation.