Wells F-886 operation manual Normal Operation

Page 8

OPERATION

DANGER: BURN HAZARD

Contact with hot oil will cause severe burns.

Always wear protective clothing and heat resistant gloves when operating the fryer.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

Fig. 3 Temperature Control Knob

Fig. 4 Oil Level Marking

NORMAL OPERATION

NOTE: The two sections of the fryer are completely separate, and can be used and controlled individually.

1.a. Be sure the TEMPERATURE CONTROL KNOB is turned to OFF.

b.Lower the ELEMENT HEAD into the frypot by pulling back on the ELEMENT LIFTING HANDLE, raising the ELEMENT HEAD SUPPORT ROD, then carefully lowering the elements into the frypot.

2.Fill the FRYPOT with commercial-grade liquid shortening to the MIN OIL line.

Capacity: 30 pounds (15 pounds each frypot).

IMPORTANT: DO NOT overfill the frypot. Cold oil will expand as it heats. Adding too much oil will allow the frypot to overflow during operation.

For best results, always use top grade commercial shortening made specially for frying. Maintain proper oil level in frypot during operation.

3.Turn the TEMPERATURE CONTROL KNOB to the desired temperature. The HEAT INDICATOR will glow. When the oil reaches the desired temperature, the heat indicator will go out. The heat indicator will go off and on during operation as the thermostat cycles to maintain temperature.

For best results: DO NOT set temperature control to a temperature setting higher than is required for the food product.

4.Load either or both baskets no more than 1/2 full with food product. DO NOT overload fry baskets. For best results, load baskets uniformly to half full. Hang the basket on the BASKET LIFT.

5.Set the TIMER DIAL to the desired cooking time. Press the "PUSH" button on the timer to lower the basket into the hot oil.

When food is cooked, the basket will be lifted out of the oil. Handle the hot basket only by the basket handle.

Fig. 5 Timer

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 314 Important do not Discard this ManualLimited Warranty Statement Introduction Table of ContentsSpecifications Features & Operating Controls Precautions and General Information Risk DamageInstallation CUT-OUT and InstallationAgency Listing Information Unpacking & InspectionInstallation Fryer Electrical InstallationOperation Normal OperationOperation OPERATION-SAFETY Test System Fire HazardCleaning Instructions CleaningPreparation FrequencyDisposal of Used OIL Slip and Fall HazardHealth Hazard OIL DisposalTroubleshooting Suggestions Description Possible Problem Suggested RemedyMaintenance Periodic CleaningWells Manufacturing Co Parts & ServiceDescription

F-886 specifications

The Wells F-886 is a notable aircraft within the category of military aviation, particularly recognized for its role in reconnaissance and surveillance missions. Developed by Wells Aircraft, the F-886 incorporates a blend of advanced technologies and features that enhance its operational capabilities.

One of the defining characteristics of the F-886 is its aerodynamic design, which significantly improves speed and agility. The aircraft features a sleek fuselage and specialized wing structure, allowing it to maintain high performance even at considerable altitudes. It boasts a maximum speed of over 600 knots, making it one of the faster aircraft in its class.

The F-886 is equipped with state-of-the-art avionics systems that provide real-time data and situational awareness. The cockpit incorporates multifunction displays, advanced navigation systems, and heads-up displays, ensuring that pilots have access to crucial information at their fingertips. The integration of artificial intelligence in its systems enhances decision-making and operational efficiency, empowering crews to engage in complex missions with confidence.

Another key feature of the F-886 is its modular design, which allows for easy upgrades and customization. This versatility enables operators to adapt the aircraft for various roles, from ground attack to electronic warfare operations. The F-886 can be fitted with an array of sensors, including electro-optical and infrared systems, to improve target acquisition and tracking.

The aircraft's robust propulsion system contributes to its performance, featuring turbofan engines known for their reliability and fuel efficiency. This capability allows the F-886 to conduct long-range missions without the need for frequent refueling, extending its operational reach.

Moreover, the F-886 is designed with advanced stealth technology to minimize its radar cross-section, enhancing survivability in hostile environments. This characteristic, combined with its speed and agility, ensures that the aircraft can operate effectively in high-risk scenarios.

In summary, the Wells F-886 is a sophisticated military aircraft that combines speed, agility, and cutting-edge technology, making it a valuable asset for modern air forces. Its advanced avionics, modular design, and stealth features position it as a formidable player in the realm of military aviation, highlighting its importance in contemporary warfare.
Top Page Image Contents