Precautions and General Information, Risk Damage

PRECAUTIONS AND GENERAL INFORMATION

DANGER:BURN HAZARD

Contact with hot oil will cause severe burns. Always wear protective clothing and heat resistant gloves when operating the fryer or filtering the oil.

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by qualified service personnel. DO NOT open any access panel that requires the use of tools. Failure to heed this warning may result in severe electric shock.

CAUTION: BURN HAZARD

Contact with hot oil may cause burns. DO NOT fill fryer beyond MAX OIL line on frypot. For disposal of oil use only a container specifically designed for the disposal of hot oil. DO NOT fill hot oil disposal container beyond MAX OIL line.

This appliance is intended for use in commercial establishments only.

This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

DO NOT submerge this appliance in water. This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring. Do not splash or pour water on, in or over any controls, control panel or wiring.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

CAUTION:

Risk of

Damage

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

F-886 specifications

The Wells F-886 is a notable aircraft within the category of military aviation, particularly recognized for its role in reconnaissance and surveillance missions. Developed by Wells Aircraft, the F-886 incorporates a blend of advanced technologies and features that enhance its operational capabilities.

One of the defining characteristics of the F-886 is its aerodynamic design, which significantly improves speed and agility. The aircraft features a sleek fuselage and specialized wing structure, allowing it to maintain high performance even at considerable altitudes. It boasts a maximum speed of over 600 knots, making it one of the faster aircraft in its class.

The F-886 is equipped with state-of-the-art avionics systems that provide real-time data and situational awareness. The cockpit incorporates multifunction displays, advanced navigation systems, and heads-up displays, ensuring that pilots have access to crucial information at their fingertips. The integration of artificial intelligence in its systems enhances decision-making and operational efficiency, empowering crews to engage in complex missions with confidence.

Another key feature of the F-886 is its modular design, which allows for easy upgrades and customization. This versatility enables operators to adapt the aircraft for various roles, from ground attack to electronic warfare operations. The F-886 can be fitted with an array of sensors, including electro-optical and infrared systems, to improve target acquisition and tracking.

The aircraft's robust propulsion system contributes to its performance, featuring turbofan engines known for their reliability and fuel efficiency. This capability allows the F-886 to conduct long-range missions without the need for frequent refueling, extending its operational reach.

Moreover, the F-886 is designed with advanced stealth technology to minimize its radar cross-section, enhancing survivability in hostile environments. This characteristic, combined with its speed and agility, ensures that the aircraft can operate effectively in high-risk scenarios.

In summary, the Wells F-886 is a sophisticated military aircraft that combines speed, agility, and cutting-edge technology, making it a valuable asset for modern air forces. Its advanced avionics, modular design, and stealth features position it as a formidable player in the realm of military aviation, highlighting its importance in contemporary warfare.